Bei wem geht Bob-Breitband noch nicht?

[gaelic]

angus gaelic # pppd call umts
Serial connection established.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/ttyACM1
rcvd [LCP ConfReq id=0x1 <auth chap MD5> <accomp> <pcomp> <asyncmap 0x0> <magic 0x779aaf80>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x441b4061> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <auth chap MD5> <accomp> <pcomp> <asyncmap 0x0> <magic 0x779aaf80>]
rcvd [LCP ConfReq id=0x2 <auth chap MD5> <accomp> <pcomp> <asyncmap 0x0> <magic 0x779aaf80>]
sent [LCP ConfAck id=0x2 <auth chap MD5> <accomp> <pcomp> <asyncmap 0x0> <magic 0x779aaf80>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x441b4061> <pcomp> <accomp>]
rcvd [CHAP Challenge id=0x0 <6a5bf8d13637a40dc2d310090e2f3cc51a4b2841e627d47d72c34079be1f6c35ca3b58b1961704ed22b3>, name = "Kermit"]
sent [CHAP Response id=0x0 <536fb4b97e64078a13d7f31d54c3099e>, name = "ppp@bob.at"]
rcvd [CHAP Success id=0x0 "Congratulations!"]
CHAP authentication succeeded: Congratulations!
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP ProtRej id=0x1 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [LCP TermReq id=0x1]
LCP terminated by peer
sent [LCP TermAck id=0x1]
Connection terminated.
Modem hangup

das sind meine Probleme mit bob. Authentifizierung anscheinend OK, aber mit der Compression haperts. Hab schon einige Optionen probiert, aber noch kein Glück.