Xml Adf

[rolfuwe]

Hatte gestern keine Zeit mehr.
////////////////////////////
sind nur für die Übersicht, damit ich meine Baukastenblöcke richtig zusammen baue.

ich probiere mal mit PHP:

PHP-Code:

<Gauge Name="RMI-HDG-Nav2-ADF" Version="1.0">
   <Image Name="200x200-rund.bmp" ImageSizes="200,200,0,0"/>

//360grd-Scheibe////////////////////////////////////////////////////

   <Element>
      <Position X="100" Y="100"/>
      <Image Name="360grd.bmp" ImageSizes="180,180,0,0">
         <Axis X="90" Y="90"/>
      </Image>
      <Rotate>
         <Value>(A:Plane heading degrees gyro,radians) /-/</Value>

         <Failures>
            <SYSTEM_ELECTRICAL_PANELS Action="Freeze"/>
            <GAUGE_GYRO_HEADING Action="Freeze"/>
         </Failures>
      </Rotate>
   </Element>

//VOR1////////////////////////////////////////////////////////////////

   <Element>
      <Position X="100" Y="100"/>
      <Image Name="VOR1-Nadel.bmp" ImageSizes="180,40,0,0">
         <Axis X="90" Y="20" PointsTo="East"/>
      </Image>
      <Rotate>
         <Value>(A:NAV1 Radial,radians) (A:Plane heading degrees gyro,radians) - pi 2 /  +</Value>

         <Failures>
            <SYSTEM_ELECTRICAL_PANELS Action="Freeze"/>
            <SYSTEM_ELECTRICAL_AVIONICS Action="Freeze"/>
            <GAUGE_GYRO_HEADING Action="Freeze"/>
            <GAUGE_ADF Action="Freeze"/>
         </Failures>
         <Delay DegreesPerSecond="180"/>
      </Rotate>
   </Element>

//VOR2////////////////////////////////////////////////////////////////

   <Element>
      <Position X="100" Y="100"/>
      <Image Name="VOR-Nadel.bmp" ImageSizes="180,40,0,0">
         <Axis X="90" Y="20" PointsTo="East"/>
      </Image>
      <Rotate>
         <Value>(A:NAV2 Radial,radians) (A:Plane heading degrees gyro,radians) - pi 2 /  +</Value>

         <Failures>
            <SYSTEM_ELECTRICAL_PANELS Action="Freeze"/>
            <SYSTEM_ELECTRICAL_AVIONICS Action="Freeze"/>
            <GAUGE_GYRO_HEADING Action="Freeze"/>
            <GAUGE_ADF Action="Freeze"/>
         </Failures>
         <Delay DegreesPerSecond="180"/>
      </Rotate>
   </Element>

//ADF////////////////////////////////////////////////////////////////

   <Element>
      <Position X="100" Y="100"/>
      <Image Name="ADF-Nadel.bmp" ImageSizes="180,30,0,0">
         <Axis X="90" Y="15" PointsTo="East"/>
      </Image>
      <Rotate>
         <Value>(A:ADF1 Radial,radians) pi 2 / -</Value>

         <Failures>
            <SYSTEM_ELECTRICAL_PANELS Action="Freeze"/>
            <SYSTEM_ELECTRICAL_AVIONICS Action="Freeze"/>
            <GAUGE_GYRO_HEADING Action="Freeze"/>
            <GAUGE_ADF Action="Freeze"/>
         </Failures>
         <Delay DegreesPerSecond="180"/>
      </Rotate>
   </Element>

//HDG/////////////////////////////////////////////////////////////////////

   <Element>
      <Position X="100" Y="100"/>
      <Image Name="HDG.bmp" Luminous="Yes" ImageSizes="24,20">
         <Axis X="12" Y="90"/>
      </Image>
      <Rotate>
         <Value>(A:Autopilot heading lock dir,radians) (A:Plane heading degrees gyro,radians) -</Value>
      </Rotate>
   </Element>

////////////////////////////////////////////////////////////////////

   <Mouse>
      <Help ID="HELPID_GAUGE_HSI"/>
      <Tooltip ID="TOOLTIPTEXT_HSI_HEADING_COURSE"/>

       <Area Left="0" Right="200" Top="0" Bottom="200">

         <Help ID="HELPID_GAUGE_HEADING_BUG_ADJUST"/>
         <Area Right="100">
            <Cursor Type="DownArrow"/>
            <Click Event="HEADING_BUG_DEC" Repeat="Yes"/>
         </Area>

         <Area Left="100">
            <Cursor Type="UpArrow"/>
            <Click Event="HEADING_BUG_INC" Repeat="Yes"/>
         </Area>
       </Area>
   </Mouse>


</Gauge>