Suche Router den ich WAN seitig fix auf 10Mbps Full Duplex stellen kann!!!

TNC.Phil · 06.06.2003, 21:20

hier screenshots/copy&pastes (außer vom switch :P):

cel-400:~ # ping -f -s 14000 192.168.0.9
PING 192.168.0.9 (192.168.0.9) from 192.168.0.200 : 14000(14028) bytes of data.
.....
--- 192.168.0.9 ping statistics ---
6728 packets transmitted, 6723 received, 0% loss, time 81782ms
rtt min/avg/max/mdev = 24.223/34.441/45.631/5.176 ms, pipe 4, ipg/ewma 12.157/36.487 ms

die andere NIC is diesmal auch a SURECOM:

Jun 6 19:53:25 cel-400 kernel: 8139too Fast Ethernet driver 0.9.24
Jun 6 19:53:25 cel-400 kernel: PCI: Found IRQ 9 for device 00:08.0
Jun 6 19:53:25 cel-400 kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xc8c99e00, 00:02:42:4c:33:c2, IRQ 9
Jun 6 19:53:25 cel-400 kernel: eth0: Identified 8139 chip type 'RTL-8139C'
Jun 6 19:53:25 cel-400 kernel: eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.

06.06.2003, 21:20	#21
TNC.Phil Master Registriert seit: 02.07.2000 Beiträge: 727	hier screenshots/copy&pastes (außer vom switch :P): cel-400:~ # ping -f -s 14000 192.168.0.9 PING 192.168.0.9 (192.168.0.9) from 192.168.0.200 : 14000(14028) bytes of data. ..... --- 192.168.0.9 ping statistics --- 6728 packets transmitted, 6723 received, 0% loss, time 81782ms rtt min/avg/max/mdev = 24.223/34.441/45.631/5.176 ms, pipe 4, ipg/ewma 12.157/36.487 ms die andere NIC is diesmal auch a SURECOM: Jun 6 19:53:25 cel-400 kernel: 8139too Fast Ethernet driver 0.9.24 Jun 6 19:53:25 cel-400 kernel: PCI: Found IRQ 9 for device 00:08.0 Jun 6 19:53:25 cel-400 kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xc8c99e00, 00:02:42:4c:33:c2, IRQ 9 Jun 6 19:53:25 cel-400 kernel: eth0: Identified 8139 chip type 'RTL-8139C' Jun 6 19:53:25 cel-400 kernel: eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)