Partitionsproblem

[blauesau]

Hallo,

ich hab da ein kleines Problemchen mit meinen Partitionen. Und zwar werden die Partitionen, die ich mit Acronis Partitionexpert erstellt habe (erste Platte + externe Platte) bei den meisten Partitionierungstools, so auch unter Powerquest Partitionmagic als FEHLERHAFT angezeigt (wenngleich auch alles funktioniert). Nur stört mich das sehr, weil ich natürlich auch mit anderen Tools imstande sein möchte, die Partitionen zu bearbeiten.

Weiß vielleicht jemand, was die Ursache für dieses Problem ist und was ich dagegen machen könnte?

Danke schon mal!


Grüße


--- edit ---

Achja, PartitionInfo (von PQ) zeigt mir folgenden Fehler an:

Error #106: Partition didn't begin on head boundary.
  ucBeginSector expected to be 1, not 2.

===========================================================================================================
Disk Geometry Information for Disk 1:    7299 Cylinders,  255 Heads,  63 Sectors/Track
System              PartSect  # Boot BCyl Head Sect  FS    ECyl Head Sect    StartSect     NumSects
===========================================================================================================
                           0  0  80     0    1    2  07    1023  254   63           64   30,748,346
Info: End C,H,S values were large drive placeholders.
  Actual values are:
        0  0  80      0    1    2  07   1913  254   63        64  30748346
Error #106: Partition didn't begin on head boundary.
  ucBeginSector expected to be 1, not 2.
                           0  1  00  1023    0    1  07    1023  254   63   30,748,410   86,510,025
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
  Actual values are:
        0  1  00   1914    0    1  07   7298  254   63  30748410  86510025



===========================================================================================================
Disk Geometry Information for Disk 3:    19457 Cylinders,  255 Heads,  63 Sectors/Track
System              PartSect  # Boot BCyl Head Sect  FS    ECyl Head Sect    StartSect     NumSects
===========================================================================================================
                           0  0  80     0    1    3  07    1023  254   63           65   84,598,225
Info: End C,H,S values were large drive placeholders.
  Actual values are:
        0  0  80      0    1    3  07   5265  254   63        65  84598225
Error #106: Partition didn't begin on head boundary.
  ucBeginSector expected to be 1, not 3.
                           0  1  00  1023    0    8  07    1023  254   63   84,598,297  104,470,688
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
  Actual values are:
        0  1  00   5266    0    8  07  11768  254   63  84598297 104470688
Error #106: Partition didn't begin on head boundary.
  ucBeginSector expected to be 1, not 8.
                           0  2  00  1023    0    1  07    1023  254   63  189,068,985  102,221,595
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
  Actual values are:
        0  2  00  11769    0    1  07  18131  254   63 189068985 102221595
                           0  3  00  1023    0    1  07    1023  254   63  291,290,580   21,286,125
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
  Actual values are:
        0  3  00  18132    0    1  07  19456  254   63 291290580  21286125



===========================================================================================================
Partition Information for Disk 1:    57,255.1 Megabytes
Volume         PartType    Status    Size MB    PartSect  #   StartSect  TotalSects
===========================================================================================================
C:             NTFS        Pri,Boot 15,013.8           0  0          64  30,748,346
D:             NTFS        Pri      42,241.2           0  1  30,748,410  86,510,025



===========================================================================================================
Partition Information for Disk 3:    152,625.3 Megabytes
Volume         PartType    Status    Size MB    PartSect  #   StartSect  TotalSects
===========================================================================================================
H:             NTFS        Pri,Boot 41,307.7           0  0          65  84,598,225
I:             NTFS        Pri      51,011.1           0  1  84,598,297 104,470,688
J:             NTFS        Pri      49,912.9           0  2 189,068,985 102,221,595
K:             NTFS        Pri      10,393.6           0  3 291,290,580  21,286,125

[Tarjan]

Google hift:
http://www.experts-exchange.com/Storage/Q_21006854.html
http://www.progsoc.uts.edu.au/lists/.../msg00047.html
http://www.samsungpc.com/gb/support/...ion_magic.html

für weitere Links mit "Error #106: Partition didn't begin on head boundary." bei Google suchen .

[enjoy2]

für solche Fälle verwende ich gerne Ranish Partitions Manager, du solltest aber wissen, was du damit anstellen kannst