| blauesau |
10.07.2004 11:43 |
Partitionsproblem
Hallo,
ich hab da ein kleines Problemchen mit meinen Partitionen. Und zwar werden die Partitionen, die ich mit Acronis Partitionexpert erstellt habe (erste Platte + externe Platte) bei den meisten Partitionierungstools, so auch unter Powerquest Partitionmagic als FEHLERHAFT angezeigt (wenngleich auch alles funktioniert). Nur stört mich das sehr, weil ich natürlich auch mit anderen Tools imstande sein möchte, die Partitionen zu bearbeiten.
Weiß vielleicht jemand, was die Ursache für dieses Problem ist und was ich dagegen machen könnte? :confused:
Danke schon mal!
Grüße
--- edit ---
Achja, PartitionInfo (von PQ) zeigt mir folgenden Fehler an:
Code:
Error #106: Partition didn't begin on head boundary.
ucBeginSector expected to be 1, not 2.
Code:
===========================================================================================================
Disk Geometry Information for Disk 1: 7299 Cylinders, 255 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
===========================================================================================================
0 0 80 0 1 2 07 1023 254 63 64 30,748,346
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 80 0 1 2 07 1913 254 63 64 30748346
Error #106: Partition didn't begin on head boundary.
ucBeginSector expected to be 1, not 2.
0 1 00 1023 0 1 07 1023 254 63 30,748,410 86,510,025
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 1 00 1914 0 1 07 7298 254 63 30748410 86510025
===========================================================================================================
Disk Geometry Information for Disk 3: 19457 Cylinders, 255 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
===========================================================================================================
0 0 80 0 1 3 07 1023 254 63 65 84,598,225
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 80 0 1 3 07 5265 254 63 65 84598225
Error #106: Partition didn't begin on head boundary.
ucBeginSector expected to be 1, not 3.
0 1 00 1023 0 8 07 1023 254 63 84,598,297 104,470,688
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 1 00 5266 0 8 07 11768 254 63 84598297 104470688
Error #106: Partition didn't begin on head boundary.
ucBeginSector expected to be 1, not 8.
0 2 00 1023 0 1 07 1023 254 63 189,068,985 102,221,595
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 2 00 11769 0 1 07 18131 254 63 189068985 102221595
0 3 00 1023 0 1 07 1023 254 63 291,290,580 21,286,125
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 3 00 18132 0 1 07 19456 254 63 291290580 21286125
===========================================================================================================
Partition Information for Disk 1: 57,255.1 Megabytes
Volume PartType Status Size MB PartSect # StartSect TotalSects
===========================================================================================================
C: NTFS Pri,Boot 15,013.8 0 0 64 30,748,346
D: NTFS Pri 42,241.2 0 1 30,748,410 86,510,025
===========================================================================================================
Partition Information for Disk 3: 152,625.3 Megabytes
Volume PartType Status Size MB PartSect # StartSect TotalSects
===========================================================================================================
H: NTFS Pri,Boot 41,307.7 0 0 65 84,598,225
I: NTFS Pri 51,011.1 0 1 84,598,297 104,470,688
J: NTFS Pri 49,912.9 0 2 189,068,985 102,221,595
K: NTFS Pri 10,393.6 0 3 291,290,580 21,286,125
|
