![]() |
![]() |
|
![]() |
![]() |
|
Simulationen Alles zum Thema Simulation |
![]() |
|
Themen-Optionen | Ansicht |
![]() |
#81 |
Veteran
![]() Registriert seit: 21.03.2000
Alter: 54
Beiträge: 226
|
![]() Hallo,
Kann mir jemand bitte die Links zu den Patches geben (bei Justflight finde ich leider nix...). danke und Gruß, Stephan |
![]() |
![]() |
![]() |
#82 |
Jr. Member
![]() Registriert seit: 22.05.2003
Beiträge: 33
|
![]() Hallo alle zusammen,
wird bei dem Patch eigentlich eine Version von FSUIPC mitgeliefert oder muß man sich selber darum kümmern. Danke im voraus. Gruß Olaf |
![]() |
![]() |
![]() |
#83 |
Inventar
|
![]() Moin Moin !
@Syff Wie wäre es beim Hersteller direkt: http://www.phoenix-simulation.co.uk/ ![]() Unter Support --> Utilities & Patches wirst Du fündig (mußt Dich aber wahrscheinlich erst anmelden). CU Stephan |
![]() |
![]() |
![]() |
#84 |
Inventar
![]() |
![]() Hallo..
werde es probieren...werde aber erst Morgen wieder berichten...
____________________________________
Gruß Samy http://signaturen.tuifly-virtual.com/1002.png IVAO Flight Operations Advisor 1 www.ivao.aero |
![]() |
![]() |
![]() |
#85 | |
Hero
![]() |
![]() Zitat:
Der FS2004 Patch ist, wie du schon sagst, zur Zeit nur direkt bei phoenix mit registrierung. Ist aber auch eine Sache von einer Minute... @Olaf Eine FSUIPC wird nicht mitgeliefert. Eine bezahlte version ist aber trotzdem nicht nötig. Ich empfehle die version 3.03. Mit den neueren Versionen gibt es Probleme in Verbindung mit dem PSS.
____________________________________
Toni Pepperl | FTI101 | Call Frogline ![]() FlyFTI virtual -->> rest in peace ![]() Dieser Post wird freundlichst präsentiert von: monatealter Wurst - Die Wurst mit Erfahrung |
|
![]() |
![]() |
![]() |
#86 |
Elite
![]() Registriert seit: 25.03.2002
Alter: 53
Beiträge: 1.407
|
![]() Hallo nochmal,
also, irgendwas ist doch bei mir voll in die Hose gegangen, wollte eben mal den Tipps aus dem PSS Forum nachgehen und die aircraft.cfg's bearbeiten (Eintrag reverser_available=1.000000), da fällt mir auf, daß es solch einen Eintrag in der cfg des A321 gar nicht gibt. Im Prinzip fehlt hier ein kompletter Teil, alles was unter "Weight & Balance" stehen sollte (wie bei der cfg des A319/320) ist weg. Wäre eventuell jemand so nett und könnte mir mal seine A321 aircraft.cfg schicken oder hier als Anhang reinstellen? (vorrausgesetzt in dieser cfg steht alles drin ![]() Edit: Ich sehe gerade, daß eine Kopie meiner FS2002 A321 aicraft.cfg genauso aussieht, muß also wohl so sein ![]()
____________________________________
Gruß Patric |
![]() |
![]() |
![]() |
#87 |
Veteran
![]() Registriert seit: 10.04.2001
Alter: 60
Beiträge: 229
|
![]() @Maverick2002
Du mußt die A321 einmal aufrufen. Den Rest (also die fehlenden Einträge) erledigt der FS9. ![]() cheers michaz P.S.: Wohl noch nie A321 im FS2002 geflogen, was? ![]()
____________________________________
FSX - Taxi into position and hold |
![]() |
![]() |
![]() |
#88 | |
Elite
![]() Registriert seit: 25.03.2002
Alter: 53
Beiträge: 1.407
|
![]() Hallo Michaz,
besten Dank für den Hinweis, tatsächlich lag es daran. ![]() ![]() Zitat:
____________________________________
Gruß Patric |
|
![]() |
![]() |
![]() |
#89 |
Inventar
|
![]() Soeben im PSS Forum gefunden:
Culled from various posts, here is a quick summary of some fixes that may or may not work for you. Neither myself or any of the original participants in the threads can GUARANTEE that these will work. Any file editing is done at your own risk! Back up your stuff, and if you are not familier with editing files, it's probably best to wait. -------------------------------------------------------------------------------- Best Practices * I'd strongly recommend reinstalling from the auto-installers. Yeah, a full reinstall is a pain if you are on a dial-up, but it insures you have the latest files and that the old ones are overwritten or erased. Old files have been known to create black borders on the windscreen and around the panels. * Watch your FSUIPC! The fresh installs may (and probably will) overwrite your newer FSUIPC with an older 2.xx edition. You should download the latest version from Pete Dowson and have it on file. Bad FSUIPC's will lead to blacked out displays. -------------------------------------------------------------------------------- Dash-8 * Torque Gauge - No fix yet. PSS investigating. * Black Borders - Be sure to remove ALL the old files that may still be there from a FS2002 install, and reinstall from the auto-installer. This seems to work for most people. -------------------------------------------------------------------------------- Airbus A319/320/321 * Flickering Mouse and Slow Panel Performance - Forum participant Bruce set up the following code to be entered on a Airbus panel file! File: fsroot\aircraft\pssab-pro\panel\panel.cfg Scroll down to the Window8 section, and make it look like this... (Window8) <--square brackets Background_color=0,0,0 size_mm=0,0 position=0,0,0,0 visible=1 ident=59 gauge00=PSS-A320!Server, 0, 0, 1 This should drastically improve your panel performance. Thanks to Mak for discovering this interaction and Bruce for the elegant solution. * Can not rotate and liftoff - Forum participant David notes that it takes tons of UP trim to take off. Looking at your flight surfaces ECAM screen, add UP trim to a level anywhere between -2.5 and (in my case) -5.0! Up, up, and away! I presume the amount of trim depends on your weight, altitude, and flight conditions. * Thrust Reversers Not Working - Forum participant Paul pointed out that he saw that adding a flag to the aircraft.cfg file enables the reversers. File: fsroot\aircraft\PSSA319\aircraft.cfg File: fsroot\aircraft\PSSA320\aircraft.cfg File: fsroot\aircraft\PSSA321\aircraft.cfg Use Windows NOTEPAD, perform a "FIND" on the word "reverser". You should get ONE hit on a line... reverser_available=0.000000 Change that to read... reverser_available=1.000000 And you should have reverse thrust capabilities. You can stop now that you can fly! -------------------------------------------------------------------------------- Airbus A330 * Cannot download ("Cannot Connect To Data Server" error) - Yup, PSS is aware, and if it hasn't been cured yet, rest assured they are working on it. |
![]() |
![]() |
![]() |
#90 |
gesperrt
Registriert seit: 09.12.2001
Alter: 61
Beiträge: 1.544
|
![]() Ich habe meine gebrannten A-32x und DASH-8 updates (hatte die damals online in ein Dummy-Verzeichniss instalieren lassen - und danach gebrannt) einfach in den FS2004 kopiert (ohne den Modules Ordner), den Patch laufen lassen - und es geht!
Keine Balken etc. Nachdem ich in den views das Häkchen weggemacht habe konnte ich die Maus im A-32x benutzen. Mit etwas Trimung hebt der Airbus auch ab. Und ich habe gute frames. Die DASH funktioniert fast perfekt. Schlechte frames, und nach einiger Zeit konnte ich HDG und Course nur noch in 10er Schritten verstellen. Funktionierte aber beim Start ohne Probleme. Die grossen Airbusse scheinen ueberhaupt nicht gepatcht worden zu sein. Es braucht immer noch zwei bis drei Flugzeugwechsel bis alle Instrumente funktionieren. Die frames sind im Keller und die Performance ist unfliegbar. Mal schauen, vielleicht kommt ja bald ein Patch. Jan (ESPC) |
![]() |
![]() |
![]() |
Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1) | |
|
|