Propeller der IFDG Do328

[Paule D-EHCF]

Guten Abend!

Bei der Dornier Do328 von IFDG stören mich die Propeller die aussehen wie zwei riesige Schallplatten-sie sind einfach zu dunkel. (Siehe Anhang)
Gibt es die Möglichkeit sie etwas "transparenter" zu machen? Evtl. durch eine Änderung der Aircraft cfg? Hab hier mal den folgenden Eintrag angehängt:

[propeller]
thrust_scalar = 1.0 //Propeller thrust scalar
propeller_type = 0 //0=Constant Speed, 1=Fixed Pitch
propeller_diameter = 11.1 //Propeller Diameter, (feet)
propeller_blades = 6 //Number of propeller blades
propeller_moi = 237 //Propeller moment of inertia
beta_max = 45 //Maximum blade pitch angle for constant speed prop, (degrees)
beta_min = 12 //Minimum blade pitch angle for constant speed prop, (degrees)
min_gov_rpm = 5000 //Miminum governed RPM
prop_tc = 0.001 //Prop time-constant
gear_reduction_ratio = 16.69 //Propeller gear reduction ratio
fixed_pitch_beta = 0 //Fixed pitch angle of fixed pitch prop, (degrees)
low_speed_theory_limit = 80 //Speed at which low speed theory becomes blended in (feet/second)
prop_sync_available = 1 //Prop synchronization available? 0=FALSE, 1=TRUE
prop_deice_available = 1 //Prop de-icing available? 0=FALSE, 1=TRUE
prop_feathering_available= 1 //Prop feathering available? 0=FALSE, 1=TRUE
prop_auto_feathering_available= 1 //Prop auto-feathering available? 0=FALSE, 1=TRUE
min_rpm_for_feather = 700 //Minimum RPM for prop feathering
beta_feather = 90 //Feathering pitch angle (degrees)
power_absorbed_cf = 0.9 //Coefficient of friction for power absorbed by propeller
defeathering_accumulators_available= 0 //Defeathering accumulators available? 0=FALSE, 1=TRUE
prop_reverse_available = 1 //Prop reverse available? 0=FALSE, 1=TRUE
minimum_on_ground_beta = 0.5 //Miminum pitch angle on ground, (degrees)
minimum_reverse_beta = -40.0 //Minimum pitch angle in reverse, (degrees)


[turboprop_engine]
maximum_torque=9236
power_scalar = 1.0 //Scalar on Turboprop power


Gruß Chris