Project Airbus released!

[Captain-Nico]

Original geschrieben von pilot-en
Nice, funktioniert bei Dir das Wing Anti-Ice?

Emh, ich dachte der Schalter wäre nur ein Dummy?


habe übrigens das merge aus dem PA forum bekommen...

PSS/PA Merge

First of all you need to copy your PA "model" folder into the "PSS A320" folder. Rename it to something like " model.pa". After this, copy all texture folders for the respective PA aircraft.

Then, open you PSS A320 " aircraft.cfg" and paste the text below:

[fltsim.xx]
title=PSS A320 Swiss International Airlines
ui_variation=PSS A320 Swiss
sim=A320v
ui_type=A320-211
sound=
model=pa
texture=swr
atc_airline=Swiss
panel=
checklists=
atc_id=HB-IJS
atc_flight_number=1839
atc_heavy=0
ui_manufacturer=Airbus
visual_damage=1
description=Designed to compete with the Boeing 737 and McDonnell Douglas MD-80, The A319/320/321 were Airbus' first entry in the narrow-body market. Although the aircraft borrows some features from the larger A300 and A310, it is essentially a new design equipped with many state-of-the-art engineering innovations. For example, The A319/320/321 were the first commercial jetliners with a full fly-by-wire control system. Other advanced features include widespread use of composite materials to reduce weight, sophisticated avionics including a gust-alleviation system allowing a smoother ride, advanced cockpit warning systems, and high-technology engines to reduce noise and fuel consumption. COPYRIGHT 2002 PHOENIX SIMULATION SOFTWARE

Be sure that the model and texture entries are the same than the names of the corresponding folders. Of course, for each aircraft that you want to use, you need to add one more fltsim entry.

After having done this, look for the "lights" entry in the same document and replace the entry with this one:

[lights]
Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.4=3, -13.90, -55.25, 2.45, pss_navred.fx ,
light.5=3, -13.90, 55.25, 2.45, pss_navgre.fx ,
light.6=3, -69.70, 0.00, 4.70 , pss_navwhi.fx ,
light.7=2, -69.70, 0.00, 4.70, PSS_strobe_Airbus ,
light.8=2, -13.95, -55.25, 2.45, PSS_strobe_Airbus ,
light.9=1, 6.8, 0.00, -5.80, pss_beacon ,
light.10=1, 3.83, 0.00, 8.47, pss_beacon ,
light.11=4, 44.41, 0.00, 3.50, PSS_vclight ,
light.12=2, -13.95, 55.25, 2.45, PSS_strobe_Airbus ,

That´s it. It should work without any problem with EGT temps or flap positions.
If you also use PSS A320, then I would recommend you to do a backup copy of the aircraft.cfg, in case you don´t like my merge. This is because the light values are altered and don´t fit into PSS A320 anymore.

Safe flights

das merge von stefan klappt ohne probleme, naja mit ausnahme auf die reverser!