Nemeth Design Relased CH 53E

[Lars A]

Ich krieg auch nur die APP an, die Motoren und Rotoren nicht....
Hier eine erste Anleitung aus dem Nemeth-Forum:
Here we go:

1) Set the Parking brake
2) Set fuel selectors to 2-1-2 (Position 4)
3) Set Exterior lights as desired
4) Set Engine Air Particle Seperator (EAPS) to Automatic (Position 2)
5) Circuit Breaker to On
6) APP handle to Start (Position 3), and wait for it to spool up
7) APP handle to Run (Position 2)
8) Turn On generators 1 & 3
9) Rotor Positioner to Engine Start
10) Digital Instruments to On
11) Start Engine 3
a. Click white Engine Start button
b. Move Engine Speed lever to Idle (Position 2), wait for spooling
c. Move Engine Speed lever to Minimum (Position 3), wait for spooling
d. Move Engine speed lever to Maximum (Position 4)
12) Repeat step 11 for Engine 1
13) Repeat step 11 for Engine 2
14) Fuel Selector levers to 3-3-1 (Position 3)
15) Generator 2 On
16) APP lever to Off (Position 1)
17) Fuel Selector levers to Direct (Position 2)
18) Activate AFCS Servo 2
19) Turn Rotor Positioner to Off (I think, this step isn't in the manuals checklist)

Hat mir aber bis jetzt auch nicht wirklich geholfen- evt. klappt`s ja bei Euch und ich bin nur zu blöde...

Gruss
Lars