CANADAIR CRJ Cockpit

[jpcxcf]

yoke

[jpcxcf]

Original geschrieben von jpcxcf
yoke

[jpcxcf]

Original geschrieben von jpcxcf

[jpcxcf]

Original geschrieben von jpcxcf

[jpcxcf]

Hi to all again.
Here's a detailed checklist for the CRJ series.
Hope you like it
Best regards,
Pedro


Preflight

nosewheel steering off
cockpit preparation completed
cabin signs set
crew oxygen checked
wing overheat test checked
altimeters set
EFIS&CAS set
BTMS checked
antiskid tested&armed
hydraulic pumps auto/on
radios & navaids set
parking brake on
----------------------------
before start

papers on board
FMS/IRS set
takeoff data set
doors closed
beacon on
fuel xflow / pumps & quantity checked, on, ____kg
ignition armed
packs & bleeds set for start
---------------------------
after start

generators & electrics on & checked
fuel xflow manual
ignition off
packs on
anti ice as required
probes on
APR tested & armed
rudder checked
nosewheel steering on
ground equipment clear
----------------------------
before take off

flaps __deg
flight controls checked
trims engaged, 0 and __ set
thrust reversers armed
flight instruments checked & set
cabin report received
takeoff briefing reviewed
ignition as required
xponder on
CAS & BTMS checked and cleared
----------------------------
after take off

fuel xflow auto
bleeds & APU set & off
ignition as required
thrust reversers off
CAS checked
altimeters standard
----------------------------
descend & approach

pressurization set
CAS checked
landing data set
altimeters set
-----------------------------
landing

ignition as required
thrust reversers armed
landing gear down & green
flaps 45
-----------------------------

after landing

xponder off
wx radar off
flaps up
probes off
anti ice as required
ignition off
apu & bleeds start/set
FCP reset
trims centered
----------------------------
shutdown

chocks & brakes as required
electrics & generators set/off
thrust levers shut off
cabin sign seat belt off
anti ice off
fuel pumps off
beacon off
nosewheel steering off

[jpcxcf]

Hi again.
Here's a sample of the LG panel done in coreldraw.
If someone want the complete panels of the CRJ I can post the cdr file here.
It took me months to do it but I think it's ok.
This work was based on actual photos, Posters and feed back from real pilot.
Best regards,
Pedro

[jpcxcf]

Here's part of the overhead

[Crashpilot]

@ Holger,

vielen Dank für die Maße auf deiner Homepage.
Die helfen mir jetzt ganz gut beim Dimensionieren.
Und nochmals Danke für das FSRELAIS System, geht prima,
und ich freue mich auf den Aufbau im Cockpit.

Gruß
Joachim

[EDXF]

@ Pedro,

Nice drawings! and thanks for the Checklist!

@ Joachim

Bitte !

[Crashpilot]

Holger,

welche ND Gauge verwendest du in deinem Projekt, oder setzt du die Project Margenta Software ein ?

Gruß Joachim
(joachimmau@web.de