[Seppel]

So hier die Aircraft Datei:

[fltsim.0]
title=PSS Boeing 777-236ER British Airways
sim=PSSB777LR-GE.air
model=
panel=
sound=
texture=
ui_manufacturer=Boeing
ui_type=777-236ER
ui_variation=British Airways 'Union Tail'
atc_id=G-VIIW
atc_airline=SPPEDBIRD
atc_flight_number=2133
atc_heavy=1

description=MelJet Boeing 777-200ER for FS2002\nVersion 2.0, Release 2 (July 18, 2003)\n\nVisual model and FDE by Melvin Rafi\nhttp:\/\/www.meljet.com. Paint by Ben Hewitt.
visual_damage=1

[General]
atc_type=BOEING
atc_model=B772
editable=1
performance=Flight Dynamic file Version 1.5 for FS2002\nEngine Thrust: 95000lbs each\nPowerplants: PW4090, Trent 895, GE90-94B\n\nThis Aircraft and the Flight Dynamic File are freeware and are not to be sold or transfered in any form for which a fee is charged. Free distribution is allowed only after approval from MelJet.

[WEIGHT_AND_BALANCE]
max_gross_weight = 656000 // (pounds)
empty_weight = 301900 // (pounds)

reference_datum_position = 0, 0, 0 // (feet) distance from FlightSim Reference position: (1/4 chord, centerline, waterline)
empty_weight_CG_position = 0, 0, 0 // (feet) longitudinal, lateral, vertical distance from specified datum

max_number_of_stations = 50

station_load.0 = 80000,0.000000,0.000000,0.000000 // Total Payload (pounds)
station_load.1 = "0.0, 0.0, 0.0, 0.0, FsStation"
station_load.2 = "0.0, 0.0, 0.0, 0.0, FsStation"
station_load.3 = "0.0, 0.0, 0.0, 0.0, FsStation"
station_load.4 = "0.0, 0.0, 0.0, 0.0, FsStation"
station_load.5 = "0.0, 0.0, 0.0, 0.0, FsStation"
station_load.6 = "0.0, 0.0, 0.0, 0.0, FsStation"

;Moments of Inertia
empty_weight_pitch_MOI = 18000000
empty_weight_roll_MOI = 5500000
empty_weight_yaw_MOI = 16300000
empty_weight_coupled_MOI= 0.0

[airplane_geometry]
wing_area = 4550.0 //Square feet
wing_span = 199.9 //Feet
wing_root_chord = 23.0 //Feet
wing_dihedral = 7.0 //Degrees
wing_incidence = 1.0 //Degrees
wing_twist = -0.5 //Degrees
oswald_efficiency_factor= 0.6 //Measure of lift effeciency of wing
wing_winglets_flag = 0 //Are winglets available?
wing_sweep = 32.0 //Degrees, wing leading edge
wing_pos_apex_lon = 25.0 //Feet, longitudinal distance from reference point, negative going aft
wing_pos_apex_vert = 0.0 //Feet, vertical distance from reference point, positive going up
htail_area = 1150.0 //Square feet
htail_span = 70.7 //Feet
htail_pos_lon = -100.0 //Feet, longitudinal distance from reference point, negative going aft
htail_pos_vert = 0.0 //Feet, vertical distance from reference point, positive going up
htail_incidence = 0.0 //Degrees
htail_sweep = 50.0 //Degrees, horizontal tail leading edge
vtail_area = 585.0 //Square feet
vtail_span = 34.3 //Feet, tip to body
vtail_sweep = 45.0 //Degrees, vertical tail leading edge
vtail_pos_lon = -108.3 //Feet, longitudinal distance from reference point, negative going aft
vtail_pos_vert = 5.8 //Feet, vertical distance from reference point, positive going up
elevator_area = 140.0 //Square feet
aileron_area = 65.0 //Square feet
rudder_area = 225.0 //Square feet
elevator_up_limit = 30.0 //Degrees
elevator_down_limit = 30.0 //Degrees
aileron_up_limit = 30.0 //Degrees
aileron_down_limit = 20.0 //Degrees
rudder_limit = 25.0 //Degrees
elevator_trim_limit = 20.0 //Degrees
spoiler_limit = 60.0 //Degrees
spoilerons_available = 1 //Spoilerons Available?
aileron_to_spoileron_gain = 3 //Aileron to spoileron gain
min_ailerons_for_spoilerons = 10 //Degrees
min_flaps_for_spoilerons = 0 //Minimum flap handle position when spoilerons activate

[Reference Speeds]
flaps_up_stall_speed = 150.0 //Knots True (KTAS)
full_flaps_stall_speed = 120.0 //Knots True (KTAS)
cruise_speed = 482.0 //Knots True (KTAS)
max_indicated_speed=330.000000
max_mach=0.900000

[Flaps.0] //Inboard Krueger
type= 2
span-outboard= 0.100
extending-time= 15.000
system_type= 1
damaging-speed= 260.000
blowout-speed= 270.000
lift_scalar= 0.0
drag_scalar= 0.0000
pitch_scalar= 0.0
flaps-position.0= 0.000, 0.000
flaps-position.1= 30.000, 255.000

[Flaps.1] //Slat
type= 2
span-outboard= 0.800
extending-time= 15.000
system_type= 1
damaging-speed= 260.000
blowout-speed= 270.000
lift_scalar= 0.02100
drag_scalar= 0.200
pitch_scalar= 0.00
flaps-position.0= 0.000, 0.000
flaps-position.1= 15.500, 255.000
flaps-position.2= 15.500, 235.000
flaps-position.3= 15.500, 215.000
flaps-position.4= 15.500, 195.000
flaps-position.5= 30.000, 185.000
flaps-position.6= 30.000, 170.000