[rolfuwe]

Beispiel für Ju-90-Smoke:
(fx öffnen mit Txt-Editor)

Wichtig sind die Höhenwerte, mit ?-Light Position suchen, dann Höhe/3.25 in fx=Y Offset, anderen Positionen in aircraft.cfg
------------------------------------------------------------
aircraft.cfg:

[SMOKESYSTEM]
// h vo/hi re/li
smoke.0= -1.4, -1.5, -24.2, fx_Ju90a_smoke // Offset y=-0.43
smoke.1= -2.9, 2.8, -12.0, fx_Ju90i_smoke // Offset y=-0.89
smoke.2= -2.9, 2.8, 12.0, fx_Ju90i_smoke
smoke.3= -1.4, -1.5, 24.2, fx_Ju90a_smoke

--------------------------------------------------------------
fx-Datei:

[Library Effect]
Lifetime=5
Version=2.00


[Emitter.0]
Lifetime=0.00, 0.00
Delay=0.00, 0.00
Bounce=0.00
Rate=60.00, 65.00
X Emitter Velocity=0.00, 0.00
Y Emitter Velocity=0.00, 0.00
Z Emitter Velocity=0.00, 0.00
Drag=0.00, 0.00
X Particle Velocity=0.00, 0.00 //-nach links, +nach rechts, Ausbreitungsrichtung
Y Particle Velocity=0.00, 0.00 //-nach unten, +nach oben
Z Particle Velocity=-99.00, -99.00 //-nach hinten, +nach vorn
X Rotation=0.00, 0.00
Y Rotation=0.00, 0.00
Z Rotation=0.00, 0.00
X Offset=0.00, 0.00
Y Offset=-0.89,-0.89 //y Offset= y in ft /:3.25, Ausbreitungsquelle
Z Offset=0.00, 0.00

[Particle.0]
Lifetime=1.00, 1.00
Type=19
X Scale=1.00, 1.00
Y Scale=1.00, 1.00
Z Scale=0.00, 0.00
X Scale Rate=1.00, 1.00
Y Scale Rate=1.00, 1.00
Z Scale Rate=0.00, 0.00
Drag=0.0, 0.0
Color Rate=0.55, 0.75
X Offset=0.00, 0.00
Y Offset=0.00, 0.00
Z Offset=0.00, 0.00
Fade In=0.00, 0.00
Fade Out=0.55, 0.90
Rotation=-120.00, 120.00
Shade=1
Face=1, 1, 1

[ParticleAttributes.0]
Blend Mode=1
Texture=fx_1.bmp
Bounce=0.020
Color Start=95, 75, 75, 20 //Rot,Grün,Blau,Dichte
Color End=95, 75, 75, 0
Jitter Distance=0.00
Jitter Time=0.00
TempK=107.25
TempRate=0.14
uv1=0.50, 0.75
uv2=0.75, 1.00
X Scale Goal=1.0 //seitliche Ausbreitung, Dicke der Smokewolke
Y Scale Goal=1.0
Z Scale Goal=0.00
Extrude Length=0.00
Extrude Pitch Max=0.00
Extrude Heading Max=0.00