Joystick dauerhaft aktivieren?

[schubi]

Moin!
Also neuen Treiber für Soundkarte habe ich!
Schreibschutz aus der FS CFG ist draußen!
Hier mal ein ausschnitt aus der FS CFG:
[JOYSTICK_MAIN {6F1D2B70-D5A0-11CF-BFC7-444553540000}]
AXIS_EVENT_00=AXIS_AILERONS_SET
AXIS_SCALE_00=64
AXIS_NULL_00=36
AXIS_EVENT_01=AXIS_ELEVATOR_SET
AXIS_SCALE_01=64
AXIS_NULL_01=36
AXIS_EVENT_02=AXIS_THROTTLE_SET
AXIS_SCALE_02=189
AXIS_NULL_02=1
AXIS_EVENT_05=AXIS_RUDDER_SET
AXIS_SCALE_05=128
AXIS_NULL_05=72
BUTTON_DOWN_EVENT_00=BRAKES
BUTTON_DOWN_REPEAT_00=1
BUTTON_DOWN_EVENT_01=ELEV_TRIM_DN
BUTTON_DOWN_REPEAT_01=1
BUTTON_DOWN_EVENT_02=ELEV_TRIM_UP
BUTTON_DOWN_REPEAT_02=1
BUTTON_DOWN_EVENT_03=FLAPS_DECR
BUTTON_DOWN_EVENT_04=FLAPS_INCR
BUTTON_DOWN_EVENT_05=AUTO_THROTTLE_TO_GA
BUTTON_DOWN_EVENT_06=GEAR_TOGGLE
BUTTON_DOWN_EVENT_08=VIEW_MODE
BUTTON_DOWN_EVENT_09=GEAR_TOGGLE
POV_MOVE_EVENT_00=PAN_VIEW
POV_MOVE_REPEAT_00=1


[JOYSTICK_MAIN {1A7A1F30-4CDE-11D6-8002-444553540000}]
AXIS_EVENT_00=AXIS_AILERONS_SET
AXIS_SCALE_00=47
AXIS_NULL_00=47
AXIS_EVENT_01=AXIS_ELEVATOR_SET
AXIS_SCALE_01=64
AXIS_NULL_01=61
AXIS_EVENT_05=AXIS_RUDDER_SET
AXIS_SCALE_05=59
AXIS_NULL_05=70
AXIS_EVENT_06=AXIS_THROTTLE_SET
AXIS_SCALE_06=150
AXIS_NULL_06=1
BUTTON_DOWN_EVENT_00=BRAKES
BUTTON_DOWN_REPEAT_00=1
BUTTON_DOWN_EVENT_01=ELEV_TRIM_DN
BUTTON_DOWN_REPEAT_01=1
BUTTON_DOWN_EVENT_02=ELEV_TRIM_UP
BUTTON_DOWN_REPEAT_02=1
BUTTON_DOWN_EVENT_03=FLAPS_DECR
BUTTON_DOWN_EVENT_04=FLAPS_INCR
BUTTON_DOWN_EVENT_05=AUTO_THROTTLE_TO_GA
BUTTON_DOWN_EVENT_06=GEAR_TOGGLE
BUTTON_DOWN_EVENT_08=VIEW_MODE
BUTTON_DOWN_EVENT_09=GEAR_TOGGLE
POV_MOVE_EVENT_00=PAN_VIEW
POV_MOVE_REPEAT_00=1
[JOYSTICK_SLEW {1A7A1F30-4CDE-11D6-8002-444553540000}]
AXIS_EVENT_00=AXIS_SLEW_SIDEWAYS_SET
AXIS_SCALE_00=47
AXIS_NULL_00=47
AXIS_EVENT_01=AXIS_SLEW_AHEAD_SET
AXIS_SCALE_01=64
AXIS_NULL_01=61
AXIS_EVENT_05=AXIS_SLEW_HEADING_SET
AXIS_SCALE_05=59
AXIS_NULL_05=70
BUTTON_DOWN_EVENT_00=SLEW_RESET
BUTTON_DOWN_EVENT_01=VIEW_MODE
BUTTON_DOWN_EVENT_02=SLEW_ALTIT_PLUS
BUTTON_DOWN_EVENT_03=SLEW_ALTIT_MINUS
BUTTON_DOWN_EVENT_04=SLEW_PITCH_PLUS
BUTTON_DOWN_EVENT_05=SLEW_PITCH_MINUS
BUTTON_DOWN_EVENT_06=SLEW_BANK_MINUS
BUTTON_DOWN_EVENT_07=SLEW_BANK_PLUS
BUTTON_DOWN_EVENT_08=SLEW_FREEZE
BUTTON_DOWN_EVENT_09=SLEW_RESET
POV_MOVE_EVENT_00=PAN_VIEW
POV_MOVE_REPEAT_00=1
[KEYBOARD_MAIN]<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
SELECT_1=49,8
SELECT_2=50,8

Es fällt auf das hier 2 Joysticks drinnstehen-oder?
Ich habe 2 Einträge die so ausschauen:[JOYSTICK_MAIN {1A7A1F30-4CDE-11D6-8002-444553540000}]
und:[JOYSTICK_MAIN {6F1D2B70-D5A0-11CF-BFC7-444553540000}]
Jetzt fragt mich nicht wie ich diese Nummern auf mein Joystick beziehen kann?
Was ebenfalls noch auffällt ist,daß kein Absatz erfolgt bei: [KEYBOARD_MAIN]<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<?? ?
Gruß: