Epox 4DPA5+ S-ATA Anschluß

Geronimo 5 · 07.02.2008, 14:18

habe das auf der controller seite gefunden:
http://www.siliconimage.com/products/product.aspx?id=28

Other Features & Benefits

Serial ATA (SATA) – 1.5 Gbps (150MB/s)
Compliant with SATA 1.0 specification
Integrated SATA Transport, Link logic, and PHY layer
48-bit sector addressing
Four independent DMA channels with 256B FIFO per channel
Virtual DMA in PCI with serial link in legacy PIO mode
Supports command buffering for ATA TF shadow registers
Supports up to 4MB external FLASH
Supports ATAPI devices: CD-ROM, DVD-ROM, etc.
Hot-Plug capable
Supports SATA active signal for 4 separate LEDs
Selectable drive strength on Tx for backplane applications
Supports spread spectrum clocking to reduce EMI
Single, digital PLL architecture with 1 PLL for all 4 channels

bedeutet das jetzt, das sata-brenner unterstützt werden ?

07.02.2008, 14:18	#5
Geronimo 5 Veteran Registriert seit: 28.07.2001 Beiträge: 354	habe das auf der controller seite gefunden: http://www.siliconimage.com/products/product.aspx?id=28 Other Features & Benefits Serial ATA (SATA) – 1.5 Gbps (150MB/s) Compliant with SATA 1.0 specification Integrated SATA Transport, Link logic, and PHY layer 48-bit sector addressing Four independent DMA channels with 256B FIFO per channel Virtual DMA in PCI with serial link in legacy PIO mode Supports command buffering for ATA TF shadow registers Supports up to 4MB external FLASH Supports ATAPI devices: CD-ROM, DVD-ROM, etc. Hot-Plug capable Supports SATA active signal for 4 separate LEDs Selectable drive strength on Tx for backplane applications Supports spread spectrum clocking to reduce EMI Single, digital PLL architecture with 1 PLL for all 4 channels bedeutet das jetzt, das sata-brenner unterstützt werden ?

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)