FSBUS network help

[Pantu]

Hi Kevin,

the Fsclient.ini looks like this:

[FSClient]
CID=1

[CDU]
TopWindowChar = "c"
Executable = "c:\Programme\CDU\cdu.exe"
WorkingDirectory = "c:\Programme\CDU"
Activate = 1
Terminate = 1
FSBUS_Background=1

FSclient can start applications like as above the PM CDU (FMC).
If you are using different PCs and like to control apps there, each FSclient should get a different CID.
It is advisable to let FSClient start and terminate the programs you like to control remotely by FSBus. (pse see example above.

Let´s get the radios controlled first:

Since the radios are contained in FS2004 you only need to define your rotaries and route them to the corresponding FS destination.
Same applies for reading the Freq. displays.

I´ll attach hereto my FSb2 and FSIF: ini file for reference. You may want to try this out as it is working fine with me. Just align the hardware to your set up. Meaning just change the controller ID the rows and subs to match your hardware setup and you´re done.

Hope this will get you a piece further.

BTW which FSBus version are you using?? Classic or NG? Or mixed?

Best rgds

Peter