CH - Pedals schon defekt?

frenzl · 27.11.2006, 08:37

Hallo Oliver,
Wenn das alles ist, was du in der cfg über die Joysticks findest, fehlt dir irgendwas. Die Achsen für linke/rechte Bremse sind nicht definiert. Bei mir siehts so aus, wobei die Buttonzuordnung frei gewählt und auch die 32 stellige GUID natürlich verschieden ist.

//Normal Mode CH Ruder-Pedale

[JOYSTICK_MAIN {DE826900-4CF4-11D9-8001-444553540000}]
AXIS_EVENT_00=AXIS_LEFT_BRAKE_SET
AXIS_SCALE_00=-23
AXIS_NULL_00=62
AXIS_EVENT_01=AXIS_RIGHT_BRAKE_SET
AXIS_SCALE_01=-23
AXIS_NULL_01=62
AXIS_EVENT_02=AXIS_RUDDER_SET
AXIS_SCALE_02=23
AXIS_NULL_02=62

//Slew Mode CH Ruder-Pedale

[JOYSTICK_SLEW {DE826900-4CF4-11D9-8001-444553540000}]
AXIS_EVENT_02=AXIS_SLEW_HEADING_SET
AXIS_SCALE_02=23
AXIS_NULL_02=62

//Normal Mode CH Yoke

[JOYSTICK_MAIN {DE826900-4CF4-11D9-8002-444553540000}]
AXIS_EVENT_00=AXIS_AILERONS_SET
AXIS_SCALE_00=57
AXIS_NULL_00=21
AXIS_EVENT_01=AXIS_ELEVATOR_SET
AXIS_SCALE_01=56
AXIS_NULL_01=18
AXIS_EVENT_02=AXIS_THROTTLE_SET
AXIS_SCALE_02=127
AXIS_NULL_02=1
AXIS_EVENT_03=AXIS_MIXTURE_SET
AXIS_SCALE_03=127
AXIS_NULL_03=1
AXIS_EVENT_04=AXIS_PROPELLER_SET
AXIS_SCALE_04=127
AXIS_NULL_04=1
BUTTON_DOWN_EVENT_00=THROTTLE_DECR_SMALL
BUTTON_DOWN_REPEAT_00=2
BUTTON_DOWN_EVENT_01=SPOILERS_TOGGLE
BUTTON_DOWN_EVENT_02=RUDDER_TRIM_LEFT
BUTTON_DOWN_REPEAT_02=1
BUTTON_DOWN_EVENT_03=RUDDER_TRIM_RIGHT
BUTTON_DOWN_REPEAT_03=1
BUTTON_DOWN_EVENT_04=PLUS
BUTTON_DOWN_EVENT_05=MINUS
BUTTON_DOWN_EVENT_06=FLAPS_DECR
BUTTON_DOWN_EVENT_07=FLAPS_INCR
BUTTON_DOWN_EVENT_08=VIEW_MODE
BUTTON_DOWN_EVENT_09=VIEW_MODE_REV
BUTTON_DOWN_EVENT_10=ELEV_TRIM_DN
BUTTON_DOWN_REPEAT_10=1
BUTTON_DOWN_EVENT_11=ELEV_TRIM_UP
BUTTON_DOWN_REPEAT_11=1
POV_MOVE_EVENT_00=PAN_VIEW
POV_MOVE_REPEAT_00=1

//Slew Mode CH Yoke

[JOYSTICK_SLEW {DE826900-4CF4-11D9-8002-444553540000}]
AXIS_EVENT_00=AXIS_SLEW_SIDEWAYS_SET
AXIS_SCALE_00=57
AXIS_NULL_00=21
AXIS_EVENT_01=AXIS_SLEW_AHEAD_SET
AXIS_SCALE_01=56
AXIS_NULL_01=18
BUTTON_DOWN_EVENT_00=SLEW_RESET
BUTTON_DOWN_EVENT_01=VIEW_MODE
BUTTON_DOWN_EVENT_02=SLEW_ALTIT_PLUS
BUTTON_DOWN_EVENT_03=SLEW_ALTIT_MINUS
BUTTON_DOWN_EVENT_06=SLEW_BANK_MINUS
BUTTON_DOWN_EVENT_07=SLEW_BANK_PLUS
BUTTON_DOWN_EVENT_10=SLEW_PITCH_PLUS
BUTTON_DOWN_EVENT_11=SLEW_PITCH_MINUS
POV_MOVE_EVENT_00=PAN_VIEW
POV_MOVE_REPEAT_00=1

Cheers,
Dietmar

27.11.2006, 08:37	#9
frenzl Veteran Registriert seit: 19.03.2003 Alter: 82 Beiträge: 361	Hallo Oliver, Wenn das alles ist, was du in der cfg über die Joysticks findest, fehlt dir irgendwas. Die Achsen für linke/rechte Bremse sind nicht definiert. Bei mir siehts so aus, wobei die Buttonzuordnung frei gewählt und auch die 32 stellige GUID natürlich verschieden ist. //Normal Mode CH Ruder-Pedale [JOYSTICK_MAIN {DE826900-4CF4-11D9-8001-444553540000}] AXIS_EVENT_00=AXIS_LEFT_BRAKE_SET AXIS_SCALE_00=-23 AXIS_NULL_00=62 AXIS_EVENT_01=AXIS_RIGHT_BRAKE_SET AXIS_SCALE_01=-23 AXIS_NULL_01=62 AXIS_EVENT_02=AXIS_RUDDER_SET AXIS_SCALE_02=23 AXIS_NULL_02=62 //Slew Mode CH Ruder-Pedale [JOYSTICK_SLEW {DE826900-4CF4-11D9-8001-444553540000}] AXIS_EVENT_02=AXIS_SLEW_HEADING_SET AXIS_SCALE_02=23 AXIS_NULL_02=62 //Normal Mode CH Yoke [JOYSTICK_MAIN {DE826900-4CF4-11D9-8002-444553540000}] AXIS_EVENT_00=AXIS_AILERONS_SET AXIS_SCALE_00=57 AXIS_NULL_00=21 AXIS_EVENT_01=AXIS_ELEVATOR_SET AXIS_SCALE_01=56 AXIS_NULL_01=18 AXIS_EVENT_02=AXIS_THROTTLE_SET AXIS_SCALE_02=127 AXIS_NULL_02=1 AXIS_EVENT_03=AXIS_MIXTURE_SET AXIS_SCALE_03=127 AXIS_NULL_03=1 AXIS_EVENT_04=AXIS_PROPELLER_SET AXIS_SCALE_04=127 AXIS_NULL_04=1 BUTTON_DOWN_EVENT_00=THROTTLE_DECR_SMALL BUTTON_DOWN_REPEAT_00=2 BUTTON_DOWN_EVENT_01=SPOILERS_TOGGLE BUTTON_DOWN_EVENT_02=RUDDER_TRIM_LEFT BUTTON_DOWN_REPEAT_02=1 BUTTON_DOWN_EVENT_03=RUDDER_TRIM_RIGHT BUTTON_DOWN_REPEAT_03=1 BUTTON_DOWN_EVENT_04=PLUS BUTTON_DOWN_EVENT_05=MINUS BUTTON_DOWN_EVENT_06=FLAPS_DECR BUTTON_DOWN_EVENT_07=FLAPS_INCR BUTTON_DOWN_EVENT_08=VIEW_MODE BUTTON_DOWN_EVENT_09=VIEW_MODE_REV BUTTON_DOWN_EVENT_10=ELEV_TRIM_DN BUTTON_DOWN_REPEAT_10=1 BUTTON_DOWN_EVENT_11=ELEV_TRIM_UP BUTTON_DOWN_REPEAT_11=1 POV_MOVE_EVENT_00=PAN_VIEW POV_MOVE_REPEAT_00=1 //Slew Mode CH Yoke [JOYSTICK_SLEW {DE826900-4CF4-11D9-8002-444553540000}] AXIS_EVENT_00=AXIS_SLEW_SIDEWAYS_SET AXIS_SCALE_00=57 AXIS_NULL_00=21 AXIS_EVENT_01=AXIS_SLEW_AHEAD_SET AXIS_SCALE_01=56 AXIS_NULL_01=18 BUTTON_DOWN_EVENT_00=SLEW_RESET BUTTON_DOWN_EVENT_01=VIEW_MODE BUTTON_DOWN_EVENT_02=SLEW_ALTIT_PLUS BUTTON_DOWN_EVENT_03=SLEW_ALTIT_MINUS BUTTON_DOWN_EVENT_06=SLEW_BANK_MINUS BUTTON_DOWN_EVENT_07=SLEW_BANK_PLUS BUTTON_DOWN_EVENT_10=SLEW_PITCH_PLUS BUTTON_DOWN_EVENT_11=SLEW_PITCH_MINUS POV_MOVE_EVENT_00=PAN_VIEW POV_MOVE_REPEAT_00=1 Cheers, Dietmar

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)