SOme progress with pictures

[bwr014]

Here some pictures of the progress of my A320 sim.

I use also the HCSTD ECAM software and i really would appriciate if DIRK could be so kind to contact me, so after a year i also would be able to get it working with my ecam select panel and the FSbus software. (Seems there is noone here that understand how to get it working so i hope Dirk you will be given the answer to solve this problem now)





The EFIS in the glare is working already like also the 2 MCDU's in the padestal..



Frans M

[stevelep]

sehr schön Congratulations

Was für Videoprojektor hast du ?

Und für dein Problem mit dem Soft hast du offset Liste für
kontrollieren die Funktionen ?

BOB

[DENGI]

Macht einen sehr guten Eindruck

Herzlichen Glückwunsch.

Weiter so.

Michael

[bwr014]

BOB and Steve ty,

I use a beamer 1024 x 768 AKA60 i thought.

About the offsets yes i have them here but it is not the problem with the offset but with the RW and I8/I16/I32 or DWORD or whatever need to be placed there.

Reason why Dirk need to help me out because i seems to be the only one in the whole world that use the great software of HTSCD in combination with FSbus.... (i really thought there where more airbus builders that use the ECAM software... wonder why they dont response here...)Just a pitty you pay a lot of money for a program and you cant use it now

Also wonder if there is already someone that figured out the A320 Radiopanel with the COM1/NAV1/NAV2 ect... select panel ect there is a option in FSbus but i am lost how you need to do that and ones again there is NO documentation about this.

gr.

Frans

[stevelep]

BOB it's my nickname ... I reply in english it's easier for me even if I speak german too ...

I don't have the soft you mentioned but if you've the offsets it must not be complicated to drive it with FSBUS, you just have to add variables in myfsif.ini file. For the format, you can use FSinterogate (part of the FSUIPC SDK) you look on the offsets you'll need, "read the buffer" and compare the result of the different format to which you need and you can find the type of variable.

If you've functions drive by mouseclick you can use the 3D scanner of FSinterrogate you read the buffer first, click on the panel, re-read, backclick and re-read and the scaner isolate the offset which were modified by your mouseclick.

to determine if it's Read or Read-Write it's logical depend of the function and no very important if you write a read only function nothing will happend....

Don't be despite there's assurely a answer to the problem, not sure that Dirk will be the best to help you it's difficult if he don't have your software ...

Have you tryed to post on the avsim forum ?
Have you search other Airbus builders, there's many index of cockpit builders with URL and email...

Ask me if you've more precise questions

Greetings

BOB

PS I've just read the post to Pete Dowson on other forum and don't understand really what you wanna do exactly. Take an example and explane the problem.
What the URL for HCSTD ?

[bwr014]

Hello Bob,

I wish you where right and it wasnt that complicated but it seems it is... NOONE can do it right now or at least is not willing to share it than!

I have looked even on the avsim forum but there as well nothing of any information reply on the HTSCD software in combination with FSBus.

As i mention before the offsets are no problem i have them but now the point is to put them in the ini file.

Ones again Dirk maybe the only one that knows how i am hopeing on his reply as well so it is possible to fix this problem.

0, "HCSDT"
1, "ECAM", 510, 0, 0x4810, I8,,W ,10,1,1,
2, "ALL", 511, 0, 0, BIT, 0, W ,10,1,1,
2, "APU", 512, 0, 0, BIT, 1, W ,10,1,1,
2, "BLEED", 513, 0, 0, BIT, 2, W ,10,1,1,
2, "COND", 514, 0, 0, BIT, 3, W ,10,1,1,
2, "DOOR", 515, 0, 0, BIT, 4, W ,10,1,1,
2, "ELEC", 516, 0, 0, BIT, 5, W ,10,1,1,
2, "ENG", 517, 0, 0, BIT, 6, W ,10,1,1,
2, "F/CTL", 518, 0, 0, BIT, 7, W ,10,1,1,

That is what i try i also try to change the W into R and into RW but nothing works ... or sometimes it response but than the next time not anymore so there is no logic in it..

And all those airbus builders seems to use the basic PM software and that is not a problem to connect to the fsbus but that is to basic for me that is why i used this software.

Frans

[bwr014]

http://www.hcsdt.de/

That is the link for the software

Frans