An Besitzer von 5,6" TFTs

[jjjanezic]

Ja, bitte teile mir die Ergebnisse Deiner Experimente mit.

[norbert bosch]

Es wird nog einige weile daueren bis ich das benotigte Kabel bekomme.
Aus die docs from Pete Dowson (bei GPSOUT.DLL) habe ich gelesen das es klappen mus nit dem GPS pilot 3 den ich habe.


It is also known to work with real Garmin GPS units which support input in the
"Series 400 Aviation" format (this may also be known as ARNAV, or KING format,
but I cannot be sure of that). For this you should set just AV400 as the only
sentence, and the speed is normally 9600 in this format, but it may be adjustable.

I've received confirmation that the "Aviation In" mode works with the AV400
protocol, with the Garmin GPS III Pilot and the GPS 196. The GPS has to be
in simulator mode, and then shows the correct track and vertical data as well
as position and speed.

Finally, for those who have an older Palm PDA, one with serial PC connection
rather than the now ubiquitous USB, you can get software which will turn the PDA
into a moving map device, working with GPSout, from www.gpspilot.com -- look for
"Atlas" or "Fly" applications. For these you need to run the link at 4800 baud
and sentences RMC and GGA should be specified for GPSout.




viel spass


Norbert

[jjjanezic]

Hallo,

aufgrund eines entscheidenden Artikels im AVSIM-Forum habe ich es geschafft, mein 295'er an den FS2004 dranzuhängen.

Folgende Einstellungen in der gpsout.ini waren notwendig:

Sentences=AV400
Interval=1000
Port=COM1
Speed=9600

Hardware: AviationIn data format

Zuerst (!) das GPS starten und in dem Sim-Mode versetzen. Dann den FS starten und siehe da: es funktioniert.

Danke nochmal an unser Team-Member Stephan für diesen Tip....