Fsbus power supply

Jan 737 · 21.08.2003, 13:52

Hi,

Is there anybody who has a good solution for a power supply?
I think that the comm.pcb power is not able for supply all the pcb's.

Regards Jan.

fmw · 21.08.2003, 14:43

Hi Jan

For my FSBUS, i use an PC-AT powersupply 300W, there is all your need.
For the FSCOM i use 12 volt.

Regards

Finn
Denmark

t.voelkel · 21.08.2003, 22:32

Hi Finn,

do you have a good cooling for the T1 (7805 ). Because I've found comments in the forum that the T1 becomes hot when you use 12V instead of 9V.
What is your experience with the temperature ?

Regards
Torsten

fmw · 21.08.2003, 23:56

Hi Jan

Yes I have a good coling on the 7805, the bigger you can get it the better it is.
My cooling is about 20 x 20 x 30 mm aluminium cooler.

Regards
Finn

21.08.2003, 13:52	#1
Jan 737 Senior Member Registriert seit: 03.04.2003 Alter: 65 Beiträge: 113	Fsbus power supply Hi, Is there anybody who has a good solution for a power supply? I think that the comm.pcb power is not able for supply all the pcb's. Regards Jan.

21.08.2003, 14:43	#2
fmw Jr. Member Registriert seit: 29.06.2003 Beiträge: 63	Hi Jan For my FSBUS, i use an PC-AT powersupply 300W, there is all your need. For the FSCOM i use 12 volt. Regards Finn Denmark ____________________________________ www.fmw.dk/cockpit

21.08.2003, 23:56	#4
fmw Jr. Member Registriert seit: 29.06.2003 Beiträge: 63	Hi Jan Yes I have a good coling on the 7805, the bigger you can get it the better it is. My cooling is about 20 x 20 x 30 mm aluminium cooler. Regards Finn ____________________________________ www.fmw.dk/cockpit

21.08.2003, 22:32	#3
t.voelkel Jr. Member Registriert seit: 25.03.2003 Alter: 56 Beiträge: 92	Hi Finn, do you have a good cooling for the T1 (7805 ). Because I've found comments in the forum that the T1 becomes hot when you use 12V instead of 9V. What is your experience with the temperature ? Regards Torsten

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)