Platte putt ?!?

[honigmaus]

Was sagt ihr dazu:


~> smartctl -a /dev/hda
Device: SAMSUNG SP1203N Supports ATA Version 7
Drive supports S.M.A.R.T. and is enabled
Check S.M.A.R.T. Passed.

General Smart Values:
Off-line data collection status: (0x04) Offline data collection activity was
suspended by an interrupting command

Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run

Total time to complete off-line
data collection: (7200) Seconds

Offline data collection
Capabilities: (0x1b)SMART EXECUTE OFF-LINE IMMEDIATE
Automatic timer ON/OFF support
Suspend Offline Collection upon new
command
Offline surface scan supported
Self-test supported

Smart Capablilities: (0x0003) Saves SMART data before entering
power-saving mode
Supports SMART auto save timer

Error logging capability: (0x01) Error logging supported

Short self-test routine
recommended polling time: ( 1) Minutes

Extended self-test routine
recommended polling time: ( 120) Minutes

Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute Flag Value Worst Threshold Raw Value
( 1)Raw Read Error Rate 0x000b 100 100 051 0
( 4)Start Stop Count 0x0032 100 100 000 53
( 5)Reallocated Sector Ct 0x0033 253 253 010 0
( 7)Seek Error Rate 0x000b 253 253 051 0
( 8)Seek Time Preformance 0x0024 089 089 000 10048
( 9)Power On Hours 0x0032 100 100 000 124909
( 12)Power Cycle Count 0x0032 100 100 000 34
(194)Temperature 0x0022 148 133 000 30
(197)Current Pending Sector 0x0033 253 253 010 0
(198)Offline Uncorrectable 0x0031 253 253 010 0
(199)UDMA CRC Error Count 0x000a 100 100 000 0
(200)Unknown Attribute 0x000b 100 100 051 0
(201)Unknown Attribute 0x000b 100 100 051 0
SMART Error Log:
SMART Error Logging Version: 1
Error Log Data Structure Pointer: 05
ATA Error Count: 2048
Non-Fatal Count: 0
Error condition: 129 Error State: 3
Number of Hours in Drive Life: 2 (life of the drive in hours)
Error condition: 126 Error State: 3
Number of Hours in Drive Life: 2 (life of the drive in hours)
Error condition: 126 Error State: 3
Number of Hours in Drive Life: 2 (life of the drive in hours)
Error condition: 126 Error State: 3
Number of Hours in Drive Life: 2 (life of the drive in hours)
Error condition: 126 Error State: 3
Number of Hours in Drive Life: 2 (life of the drive in hours)



- glaubt das Ding etwa seine Lebenszeit sei abgelaufen?!?

- konnte es grade noch mit reiserfsck --rebuildtree reparieren ...

- gibts a Möglichkeit dem Drive den "Kopf grad zu setzen"?

- hab mal ein Backup gmacht & lass dem smartmon mal laufen .... das Drive is net mal 1 Jahr alt ...