![]() |
![]() |
|
![]() |
![]() |
|
Linux, UNIX, Open Source Rat & Tat bei Problemen und Fragen rund um GNU/Linux, BSD und sonstige UNIXe |
![]() |
|
Themen-Optionen | Ansicht |
![]() |
#1 |
Inventar
![]() |
![]() ich hab nen canon lidescan 30 usb-scanner. wenn ich jetzt aber mit gimp bzw xsane scannen will bekomme ich immer die meldung "kein gerät gefunden!". ich hab auch schon verschiedene ports ausprobiert, hat aber nichts gebracht.
der scanner funktioniert aber. hab das teil unter windows an verschieden ports getestet. |
![]() |
![]() |
![]() |
#2 |
Master
![]() Registriert seit: 10.10.2002
Beiträge: 711
|
![]() Findet sane-find-scanner den Scanner?
|
![]() |
![]() |
![]() |
#3 |
Inventar
![]() |
![]() werd ich mal ausprobieren wenn ich wieder zuhause bin.
|
![]() |
![]() |
![]() |
#4 |
Inventar
![]() |
![]() sane-find-scanner gibt folgendes aus:
Code:
# No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04a9, product=0x220e, chip=LM983x?) at libusb:001:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. Code:
hans@AMIGA-LINUX:~> scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). |
![]() |
![]() |
![]() |
#5 | |
Master
![]() Registriert seit: 10.10.2002
Beiträge: 711
|
![]() Zitat:
|
|
![]() |
![]() |
![]() |
#6 |
Inventar
![]() |
![]() auch mit "su" wird der scanner bei scanimage -L nicht gefunden
|
![]() |
![]() |
![]() |
#7 |
-------------
![]() |
![]() http://www.sane-project.org/sane-mfgs.html
hier steht, dass mit einen Treiber für Plustek der Scanner funktionieren soll http://www.gjaeger.de/scanner/plustek/ http://www.sane-project.org/man/sane-plustek.5.html
____________________________________
EnJoy * Kl. Anleitung, welche Infos bei Problemen benötigt werden * was ich nicht weiß, weiß Google bzw. vorm Posten Listen to Bart * BITTE, füttert keine Trolle, siehe auch Definition bzw. Merkbefreiung - Verordnung * Wie man Fragen richtig stellt |
![]() |
![]() |
![]() |
Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1) | |
|
|