A320 Homecockpit

[LH_A320]

Hallo zusammen,

verfolge seit einem halben jahr dieses forum, und bin voll begeistert von all euren ideen und werken. Nun ist der Neubau unseres einfamilienhauses und somit der keller meines zukünftigem simraumes fertig!(Simraum 4,5*8m) Darum habe ich mich für den bau eines a320 entschieden. Die elektronik übernimmt FSBUS das auf anhieb geklappt hat, an dieser stelle ein dank an dirk. Um nun auf den punkt zu kommen, welche software könnt ihr mir entfehlen um diese sache umzusetzen?

Mit PSS habe ich so meine probleme da die daten fsbus nicht auslesen kann!

[Thorsten28]

Hallo an alle,

Auch ich habe mich nun entschlossen ein A320 Cockpit mit Fsbus zu realisieren. Habe das ganze Forum auf den Kopf getsellt um herauszufinden welche SW ausser PSS Bus sich dafür eignet.
An alle A320 Spezis hier im Forum, welches Flugzeug verwendet Ihr als basis, und wo kann man sich evtl. die OFFSETS für FSBUS A320 herunterladen.??? Ich hoffe Ihr könnt uns dabei helfen.


Danke für Eure Hilfe

Thorsten

[bwr014]

I am also working on a Airbus 320. I am sorry i dont understand all you ask on this page so maybe if you can translate the problem into english i maybe can help you out..

Thanks

Just some updatestatus of my airbus:


gr.

Frans M

[Lightfoot jr.]

Original geschrieben von bwr014
I am also working on a Airbus 320. I am sorry i dont understand all you ask on this page so maybe if you can translate the problem into english i maybe can help you out..

Thanks

Just some updatestatus of my airbus:


gr.

Frans M

Dear Frans M,

if you´re interested in German Newsgroups there´s an easily way what to do !

1.Mark and copy the text you want to translate

2. Go to http://www.freetranslation.com/

(just for example, there are a lot of free online-translators in the web)

3. Choose "German to English" and paste the text into the Mask and you´ll get a translation

regards

p.s. You´ve build a very nice cockpit!

[ralfan]

Hallo LH,
Hallo Thorsten,

auch ich baue seit 3 Jahren an einem A320 Simulator (zur Hälfte fertig)

In Kürze meine Software Planung:

Flugsimulator FS2004
Schalter, Drehgeber, Anzeigen FSBUS
ND/PFD CPT Project Magenta
ND/PFD F/O " "
Primary and secondary engine displays " "
MCDU´s " "
FCU " "
Overhead HCSDT

soweit ich weiss, wird mit Prooject Magenta ein config-file für den A320 mitgeliefert. Bitte von anderen Lesern um Bestätigung.

cu Ralf

[bwr014]

The free translation is a nice idea but that isnt going to work beside the fact that this free translation will understand prob the words like hallo and aircraft but to this specifide forum there will be no freetranslation going to understand it or it will be translated into a way i even would get more lost than just try to read it in german.

But it is ok i just mention it because of the fact that i could maybe help ppl as well. Now it is possible you maybe looking for a answer and will miss it because of the language.

But we will manage

Frans M

[bwr014]

But what offsets are needed for the FSbus? I maybe have some....

Frans M

[Thorsten28]

Hello Frans,

Sorry for the long time to wait for the answer. I had some troubles with cookies on this page. guidu was helping me. thanks guido.

My question is if you build an A320 you also need a Plane like PSS320 or what ever, witch type to you use. My Problem is i have no offsetts for the Autopilot and so on witch are used with FSBUS.

@RALFAN
Welches Flugzeug benutzt du? default 737 oder etwas anderes. Wo hast du die Offsets gefunden.


Danke für Eure Hilfe

[bwr014]

Hello Thorten,

Welcome back i would say... and dont eat all the cookies again :P

Ok i think we approch the problem on a different way... i am building a cockpit that is bases on a A320 and not on a model like PSS or any other brandmark. I use FS only for the visual outside so i dont need to see any plane. I now use a IDG model but that is just a basic thing because there panel is also build on a 737 i think and i already know that the real things on my cockpit dont match with the panel that is showed in FS itself.

What i want is when i push a button on my padestal for instance it needs to do what it suppose to do and i dont need to see that in the FS itself. example... if i push a button on my ecam select it need to change the ecam panel in my cockpit. If i turn the ecam selector or the autopilot it needs to work. I think that the problem lay more in your offset and what you use behind as software. I use for instance the software of my PDF/ND from Projectmagenta and that works very well with FSBUS the autopilot works in FSBUS ok but only if i also use the FCU of projectmagenta ect ect.
For the ECAM i use the HCSDT software and for my throttle and gear and stearing i use FSCommunicator and they all use offsets that are based on the FSCUIP

I know that pss have developed there own software and i think that there is the prob of maybe not working all the things direct. But so far i know must a offset work whatever program you use as long as FS understand the offset.

You can inside the ini file of fsbus put offsets that need to correspondent with the software you use. SO all you need to know is what offset the guys from pss use and implant into the inifile of fsbus i think?

On the microsoft side you can find all the offsets aswell and if you use FSCuip you also can try to play with that because FSCuip sends it from one place to the other so far i understood. SO i assum if you send a offset from autopilot on to FSCUIP it will just do what it needs to do. Does PSS have any option to get into there software so you know what offsets they use?

gr

Frans M

[lemo]

Hi Leute
ich will nun auch ein homacockpit bauen und wollte fragen ob ihr ein paar tipps oder links habt?