![]() |
![]() |
|
![]() |
![]() |
|
Registrieren | Hilfe/Forumregeln | Benutzerliste | Kalender | Suchen | Heutige Beiträge | Alle Foren als gelesen markieren |
Simulationen Alles zum Thema Simulation |
![]() |
|
Themen-Optionen | Ansicht |
![]() |
#11 |
Inventar
![]() Registriert seit: 02.01.2002
Alter: 61
Beiträge: 4.238
|
![]() Wie ich schon erwähnte die Registrierung lief bei mir auch online von meinem Notebook aus. (was da jetzt genau anzuklicken war weis ich auch nicht mehr, ist schon zu lange her)
Wenn ich mich recht erinnere kam beim online registrieren dann der Hinweis das in kürze die Registrierfiles per Mail kommen. Diese Mail kam auch innerhalb weniger Minuten. Diese beiden Registrierfiles waren dann als Mailanhang angehangen. Also im Prinzip exakt das was Jörg schreibt. Diese beiden Files habe ich dann auf meinen Memorystick/Diskette kopiert und auf meinen eigentlichen Betriebs PC wo die Track IR Software und Track IR installiert ist aufgespielt. (bei diesem wurde nie eine online Registrierung durchgeführt es reichen diese beiden Files im entsprechenden Pfad) Funktioniert ohne Probleme. Das bedeutet wenn ich z.B meinen Track IR und das Vectorpack an einen Bekannten verschenken würde, dann müsste ich ihm auch die beiden Registrierfiles schenken. Mit diesen könnte er das Track IR ohne jegliche Registrierung betreiben. |
![]() |
![]() |
![]() |
#12 |
Inventar
![]() Registriert seit: 17.01.2003
Alter: 48
Beiträge: 1.989
|
![]() Hi Jobia,
Ich habe keine Mail und keine Files. Habe mich aber mal an den Support gewandt. Mal schauen.
____________________________________
Gruß Marcus |
![]() |
![]() |
![]() |
#13 |
Inventar
![]() Registriert seit: 02.01.2002
Alter: 61
Beiträge: 4.238
|
![]() Also ich habe das als Antwort bei meiner Produktaktivierung über Mail bekommen:
Thank you for visiting our product activation service. -------------------------------------------------------- This email contains directions on how to install your vector License in two easy steps : 1) Make sure you have installed the TrackIR v4.0 software 2) Copy the License files that are attached to this email into the License folder of the TrackIR v4.0 software. The installation steps are described in more detail below : -------------------------------------------------------- 1) The Vector Expansion requires the TrackIR software version 4.0 to be installed, please visit our software download section if you have not yet installed it. http://www.naturalpoint.com/trackir/...downloads.html 2) You have successfully activated your NaturalPoint Vector Expansion, once you complete the final step of the activation you will be able to use the new Vector Tracking technology in the TrackIR version 4.0 software. The two Vector License files required to complete the activation are attached to this email, please copy them to the License folder located under the folder that your TrackIR software version 4.0 is installed to. This is usually : C:\program files\naturalpoint\trackir4\License The attached files are named License.sig and License.dat. If your email program has renamed the files, you must correct the names in order for the License to work. In order for the License to be recognized, the TrackIR software must be shut down and re-started. When it starts back up, the Vector Expansion logo should be blue instead of grey, this indicates that the License is recognized and valid. -------------------------------------------------------- NaturalPoint is pleased to provide you with premium optical tracking products. If you have any questions or problems, please contact our technical support team at support@naturalpoint.com or call toll free at 1.888.865.5535. For more information about the Vector Expansion package, visit the following section of our website : http://www.naturalpoint.com/trackir/...ts/vector.html Thank you, NaturalPoint Inc. |
![]() |
![]() |
![]() |
#14 |
Inventar
![]() Registriert seit: 17.01.2003
Alter: 48
Beiträge: 1.989
|
![]() Hi Jobia,
Die Leute von rightthing.nl haben mir einen Link geschickt. Da war die Aktvierung, so wie du sie beschrieben hast. Ich hatte die noch nie. Bei mir habe ich das über die Tracksoftware gemacht und diese hat sich dann "freigeschaltet". Aber jetzt müsste es gehen. Danke!
____________________________________
Gruß Marcus |
![]() |
![]() |
![]() |
Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1) | |
Themen-Optionen | |
Ansicht | |
|
|