Partition Magic 7 - Problem

[holzi]

Hier ein Auszug aus der Support-Seite von PowerQuest:
__________________________________________________ _______________
Solution: Error 117 Partition's drive letter cannot be identified

Run PARTINFO to detect any partition table errors. If partition table errors are found, search the PowerQuest Knowledge Base for solutions to the specific errors.

If no partition table errors are found, the problem may be due to a conflict that is seen only in Windows. In this case, you should run PartitionMagic from the rescue diskettes.

If you are trying to delete, move, or resize a partition when you receive the error, then try hiding the partition, exiting PartitionMagic, and running PartitionMagic again after the system reboots. At this point, you should be able to manipulate the partition as desired.


ServerMagic 4.0 or VolumeManager 2.0 on a Windows Terminal Server
-------------------------------------------------------------------------------------------------------
If you are using ServerMagic 4.0 or VolumeManager 2.0 on a Windows Terminal Server, you must determine why drive letters aren't being seen properly. We do NOT recommend that you use the ServerMagic 4.0 or VolumeManager 2.0 rescue disks to manipulate volumes. Please contact PowerQuest Technical Support for assistance.


Windows 95 or DOS
------------------------------
If Error 117 is occurring in conjunction with Windows 95 or DOS, try booting from a different version of DOS.