Hallo,
also mein Brenner macht seit einigen Tagen Mucken. Ich wei nicht warum und woher, aber es nervt.
Der LogFile einer Fehlermeldung: (kenn mich Nüsse aus und kann nichts herauslesen!!)
Nero Version: 6.0.0.11
Recorder: <LITE-ON LTR-48246S> Version: SS0E - HA 2 TA 1 - 6.0.0.11
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: 1004 - HA 2 TA 0 - 6.0.0.11
Adapter driver: <> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : ST380021A 3.19 nvidesm Port 1 ID 0 DMA: Off
DiskPeripheral : IC35L060AVER07-0 ER6O nvidesm Port 1 ID 1 DMA: Off
CdRomPeripheral : LITE-ON LTR-48246S SS0E nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M17121004 nvidesm Port 1 ID 1 DMA: Off
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 231MB (237180kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.8.2003
CD-ROM (ISO)
13:25:43 #1 Text 0 File Isodoc.cpp, Line 5771
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 16 43 (LI 97:22.67), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 272344 (272344) = #272344/60:31.19
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 272342 blocks [LITE-ON LTR-48246S ]
--------------------------------------------------------------
#11 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [LITE-ON LTR-48246S ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 558067712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
272344 | lead-out | 1 | 0x00 | 0x41
#12 Text 0 File ThreadedTransferInterface.cpp, Line 964
Removed 2 run-out blocks from end of track 1.
#13 Phase 32 File dlgbrnst.cpp, Line 1843
Simulation started at 48x (7.200 KB/s)
#14 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:25:43 #15 Text 0 File Mmc.cpp, Line 18878
Set BUFE: supported -> ON , SMART-BURN : ON
13:25:49 #16 SCSI -500 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03500000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
13:25:49 #17 Text 0 File Writer.cpp, Line 455
13:25:49.843 LITE-ON LTR-48246S : WriteBuffer reduced to 32768 Bytes
13:25:49 #18 Text 0 File Writer.cpp, Line 318
13:25:49.859 - LITE-ON LTR-48246S : Queue again later (Intervall : 9msec)
13:25:54 #19 SCSI -1064 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03500000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02
13:25:54 #20 CDR -1064 File Writer.cpp, Line 335
Invalid block address
13:25:54 #21 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
13:25:54 #22 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader
13:25:54 #23 CDR -201 File WriterStatus.cpp, Line 152
Invalid write state
13:25:54 #24 TRANSFER -18 File WriterStatus.cpp, Line 152
Could not perform EndTrack
13:25:54 #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
13:25:57 #26 Phase 34 File dlgbrnst.cpp, Line 1843
Simulation failed at 48x (7.200 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17.07.2002 08:53:02
Ich habe neue ASPI-Treiber installiert, neue Nero-Version organisiert (6.0.0.11), aber es geht nicht.
Kann der Brenner kaputt sein? Den habe ich erst seit Jänner!!
THX und Gruß Chep