Zitat:
|
sieht, hat ers dort problemlos gefressen.
|
Ok. Geladen hast sie mit -f oder?
Vielleicht liegts am Xawtv. Aus
http://alpha.dyndns.org/ov511/faq.html:
Zitat:
Q: Xawtv doesn't display anything.
A: Try the following:
Xawtv normally starts without displaying anything. You have to right-click in its window to get to the control panel, click on "capture", and then select "grabdisplay".
Let it capture for at least ten seconds. Some cameras need a lot of time to adjust to the lighting conditions.
Make sure you have at least driver version 1.43. It fixed support for the scaler hardware on some video cards.
Try running xawtv with the -remote and/or -noxv option.
Upgrade to a newer version of xawtv. Some older versions don't work for some people.
Try vidcat instead of xawtv to make sure that your camera is working at all. If it isn't, look through this FAQ for a possible solution, and double-check that you installed and connected everything properly. Email me if it still won't work.
|
oder
Zitat:
Q: The window is just a solid color (besides black, usually green), or has many colored lines running through it.
A: Your hardware scaling isn't working; XFree86 is probably to blame. You must be using ov511 version 1.43 or greater for hardware scaling to work. If it still doesn't work, start xawtv with the option -remote. If your xawtv doesn't have that option, upgrade it.
|
Aus
http://alpha.dyndns.org/ov511/apps.html
Zitat:
|
Upgrade to driver version 1.43 or use the -noscale option if you get a black or green image
|