[Janicki]

Hier ist aus einem englischen Forum die "englische" Anleitung.
Mann ich stehe voll auf dem Schlauch:

1 - How to configure your joystick

- Open the A320PIC.cfg file located in your FS2002 folder (C:\Program Files\Microsoft Games\FS2002\A320PIC.cfg for instance) with any text editor (Notepad for instance).

- Open the controller configuration dialog box:
- For Windows XP, Go to Start->Control Panel->Gaming Options
- For other Windows versions, Start->Settings->Control Panel->Gaming Options

- Select your primary controller and press "Properties".

- There you see every axis available with your controller.

- In A320PIC.cfg, go to the end of the file and look for the string "Rudder_Axis=". It should read "JOYSTICK_1_AXIS_RX". This means that the axis named "RX" of your primary controller (JOYSTICK_1) is assigned to the rudder. If you don't have rudder movement in FS, this is because your controller does not have any RX axis. So let's move on.

- Go back to the controller dialog box and move your rudder controller. Note the name under the slider that just moved. Sometimes the name might be partly visible (my RX axis says "X Ro..", my SLIDER_1 says "Slid..").

- Now that you have an axis name, replace the one in the cfg using the following table:


Name in Controller Properties Name in A320PIC.cfg
X Axis (or X Ax..) AXIS_X
Y Axis (or Y Ax..) AXIS_Y
Z Axis (or Z Ax..) AXIS_Z
X Rotation (or X Ro..) AXIS_RX
Y Rotation (or Y Ro..) AXIS_RY
Z Rotation (or Z Ro..) AXIS_RZ
Slider 1 (or Slid..) SLIDER_1
Slider 2 (or Slid.. if you see two sliders) SLIDER_2

- You can use the same procedure for every axis in A320PIC.cfg.

- Note that in A320PIC.cfg JOYSTICK_1 refers to your PRIMARY controller, JOYSTICK_2, your SECONDARY, etc... Be sure to modify this in A320PIC.cfg as needed. A320 PIC can handle up to 4 controllers, JOYSTICK_1 through JOYSTICK_4.