http://www.uktsupport.co.uk/pb/mb/tempest.htm
Zitat:
RAM : - The motherboard has two DIMM sockets for memory modules. These sockets accept only 168-pin DIMM modules. The connectors of the memory sockets are gold-plated. In order to avoid oxidation, also the DIMM modules used must have gold-plated connectors. Before installing a new memory module, please verify that you have at least one free DIMM socket available.
- Only unbuffered 3.3 V SDRAM may be used.
- Single- or double-sided DIMMs may be used.
- SDRAM DIMMs may be up to 256 MB big.
- Maximum memory size supported by the motherboard is 512 MB.
- You can use Parity (×72) DIMMs or ECC (1-bit Error Code Correct) as the motherboard supports also memory checking.
- If the front bus is set to 100 MHz, then memory must be consistent with PC100 SDRAM specifications.
|
hm ... schaut nach einer simplen inkopatibilität aus ... ich würds mal mit einem modul eines anderen herstellers probieren ...
ist der ram ein 'infineo original'-riegel oder sind nur die infineon chips auf einer platine eines drittherstellers verbaut?
____________________________________
Praktizierender Eristiker
No hace falta ser un genio para saber quién dijo eso.
Der wirklich faule Mensch ist oft extrem fleißig, denn er will möglichst schnell wieder faul sein.
|