nach dem Screenshot sollte die Partitionen in Ordnung sein, komisch
wie willst du den die Platte partitionieren
bzw. mittels Google gefunden
http://www.powerquest.com/support/doclink.cfm?id=pr1883
bzw. Fehlermeldung 2005
http://www.powerquest.com/support/primus/id1083.cfm
Zitat:
Solution: Error 2005 One or more lost clusters are present.
Often, this error can be resolved by running ScanDisk or CHKDSK on the affected drive. If this does not work, however, there are several other possible causes and related fixes.
Cause 1: Some programs (such as QEMM) set the volume bit on files they create. This results in an illegal file type.
Fix 1: To fix this error:
a. Find out which file has the volume bit set.
b. Copy the file to another drive.
c. Delete the original file and replace it with the copy.
Cause 2: This error can occur when you run ServerMagic on a NetWare 5.0 system and perform operations on a FAT partition. This problem is caused by a NetWare NLM that writes to the disk while ServerMagic has the disk reserved.
Fix 2: To avoid this error, type UNLOAD NWKCFG.NLM at the console prompt before loading ServerMagic. If you continue to receive this error, down the server and delete the following files from the C:\NWSERVER directory: SERVCFG.000, SERVCFG.NBK, SERVCFG.TMP. For more information on these files, please refer to document 2942146 on the Novell support site.
Cause 3: This error is frequently caused by outdated SCSI controller drivers.
Fix 3: The error usually disappears after you install the latest drivers for your SCSI controller.
If this error persists after you have applied the recommended fixes, please send the following information to PowerQuest Technical Support:
- A Debug report (see PowerQuest Solution PR163, "Running a Debug Report").
- A PARTINFO report (see PowerQuest Solution PR94, "Running a PartitionInfo").
- The information outlined in PowerQuest Solution PR164, "Information Needed for a Trouble Report."
- (If you are running Windows Me) The VFNSTDBG.TXT file located in C:\Program Files\PowerQuest\PartitionMagic 6.0\Win9X\VFD.
- A copy of the contents of the Master Boot Record captured with WRPROG.EXE (see PowerQuest Solution PR1391, "Instructions for Using the WRPROG.EXE Utility").
Problem Description:
Error 2005 One or more lost clusters are present.
Error 2005
Problem Environment:
PartitionMagic
PartitionMagic Pro
Drive Image
Drive Image Pro
DeployCenter
Drive Copy
VolumeManager
ServerMagic
NOTE: If you are having problems copying a DOS partition with the Remote Agent, please see PowerQuest Solution PR2593.
|
wenn ich das richtig lese, lass mal Scanddisk, oder Chkdsk laufe, hoffe der Fehler ist dann weg