Wegen der Schwierigkeit, das NT auszubauen (wir sprachen an anderer Stelle darüber), hab' ich mich vorläufig einmal davor "gedrückt" - und beschlossen, auf den nächsten Blue Screen zu warten.
Heute war ich Joggen, der Rechner lief im Leerlauf - und als ich zurück kam, war der nächste BSOD da:
Code:
....
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff880030f9180, The PRCB address of the hung processor.
Arg4: 0000000000000006, 0.
Debugging Details:
------------------
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
....
************
ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.
MODULE_NAME: nt
FAULTING_MODULE: fffff80002c4a000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7951a
BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_8_PROC
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
CURRENT_IRQL: 0
STACK_TEXT:
fffff800`04094938 fffff800`02d21a89 : 00000000`00000101 00000000`00000019 00000000`00000000 fffff880`030f9180 : nt+0x80640
fffff800`04094940 00000000`00000101 : 00000000`00000019 00000000`00000000 fffff880`030f9180 00000000`00000006 : nt+0xd7a89
fffff800`04094948 00000000`00000019 : 00000000`00000000 fffff880`030f9180 00000000`00000006 fffff880`016f98ca : 0x101
fffff800`04094950 00000000`00000000 : fffff880`030f9180 00000000`00000006 fffff880`016f98ca 00000006`00000000 : 0x19
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: ntoskrnl.exe
BUCKET_ID: WRONG_SYMBOLS
Followup: MachineOwner
Der Mini-Dump sieht also ähnlich aus. Ich versteh' nur nicht, warum es das Netzteil sein soll, wenn PC-Probe II die Spannungen als relativ genau und auch praktisch nicht schwankend ausliest.
Seid Ihr immer noch der Meinung, dass ich das NT tauschen soll...?
Thx
Quintus