[Steffmann]

Panel Merge RFP – Posky am Beispiel einer Frachtmaschine
(so hat es zumindest bei mir wunderbar geklappt)
1.) Aus einem Aircraft-Ordner einer RFP Frachtmaschine den „Panel-Ordner“ und wenn man will auch den „Sound-Ordner“ in den Posky Aircraft – Ordner kopieren. Die Dateien dabei überschreiben.
2.) Aus dem RFP „Model-Ordner“ die Datei „freighter.mdl“ kopieren und in den Posky „Model-Ordner“ einfügen.
3.) Die Datei „Aircraft.cfg“ und die Datei „VMAX_Classic_2.air“ aus dem RFP – Ordner kopieren und in den Posky – Ordner einfügen, dabei die Aircraft.cfg überschreiben.
4.) In der Aircraft.cfg im Posky - Ordner nun folgende Eintragungen unter den jeweiligen Unterpunkten machen (aus diesem Dokument kopieren und in der Aircraft.cfg überschreiben)
[Contact points]
point.0=1, 66.8, 0.0, -13.833, 1574.8, 0.000000, 5.826899, 70.0 ,0.700, 0.610, 0.518, 14.000000, 14.000000, 0.000000, 0.000000, 0.000000
point.1=1, -20.5, -17.3, -15.533, 1574.8, 1.000000, 5.826899, 6.0 ,2.520, 1.000, 0.651, 18.000000, 18.000000, 2.000000, 0.000000, 0.000000
point.2=1, -20.5, 17.3, -15.533, 1574.8, 2.000000, 5.826899, 6.0 ,2.520, 1.000, 0.651, 18.000000, 18.000000, 3.000000, 0.000000, 0.000000
point.3=2, -70.7, -102.0, 6.0, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 0.000000, 0.000000
point.4=2, -70.7, 102.0, 6.0, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 6.000000, 0.000000, 0.000000
point.5=2,-126.6, 0.0, 5.8, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 9.000000, 0.000000, 0.000000
point.6=2, 66.8, 0.0, 5.8, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 4.000000, 0.000000, 0.000000

static_pitch=1.00
static_cg_height=13.625
gear_system_type=0

[flaps.0]
type = 1 // 1 - tail, 2 - lead
span-outboard = 0.5 // 0.0 .. 1.0
extending-time = 49 // seconds
flaps-position.0=0.000000,0.000000
flaps-position.1=6.665409,0.000000
flaps-position.2=13.330818,0.000000
flaps-position.3=19.996227,0.000000
flaps-position.4=26.661636,0.000000
flaps-position.5=33.327045,0.000000
flaps-position.6=39.992454,0.000000
damaging-speed = 200 // KIAS
blowout-speed = 250 // KIAS
lift_scalar = 0.23
drag_scalar = 1.00
pitch_scalar= 1.00
system_type = 1 //Hydraulic

[Flaps.1]
type = 1 // 1 - tail, 2 - lead
span-outboard = 0.2
extending-time = 49 // seconds
flaps-position.0=0.000000,0.000000
flaps-position.1=6.665409,0.000000
flaps-position.2=13.330818,0.000000
flaps-position.3=19.996227,0.000000
flaps-position.4=26.661636,0.000000
flaps-position.5=33.327045,0.000000
flaps-position.6=39.992454,0.000000
damaging-speed = 200 // KIAS
blowout-speed = 250 // KIAS
lift_scalar = 0.23
drag_scalar = 1.000
pitch_scalar=-15.00
system_type = 1 //Hydraulic

[Flaps.2]
type= 2
span-outboard= 0.800
extending-time= 3.000
system_type= 1
damaging-speed= 250.000
blowout-speed= 300.000
lift_scalar=-1.00
drag_scalar= 0.000
pitch_scalar=-15.25
flaps-position.0= 0.000, 0.000
flaps-position.1= 0.500, 0.000
flaps-position.2= 1.000, 0.000

[Flaps.3]
type= 2
span-outboard= 0.800
extending-time= 3.000
system_type= 1
damaging-speed= 250.000
blowout-speed= 300.000
lift_scalar=-1.00
drag_scalar= 0.000
pitch_scalar=0.00
flaps-position.0= 0.000, 0.000
flaps-position.1= 0.000, 0.000
flaps-position.2= 1.000, 0.000

[LIGHTS]
light.0 = 1, 65.200, 0.600, 19.100, Opensky_beacon ,
light.1 = 1, 13.900, 0.000, -7.080, Opensky_beacon ,
light.2 = 2, -41.600, -94.400, 8.800, fx_strobeh ,
light.3 = 2, -41.600, 94.400, 8.800, fx_strobeh ,
light.4 = 3, -122.3, -0.250, 12.300, Opensky_nav_yellow ,
light.5 = 3, -122.3, 0.250, 12.300, Opensky_nav_yellow ,
light.6 = 2, -121.5, 0.000, 11.450, fx_strobeh ,
light.7 = 3, 83.55, 0.000, 14.850, fx_vclighth ,
light.8 = 9, -111.1, -4.500, 43.750, Opensky_wing_light , // <-----3 previously
light.9 = 9, -111.1, 4.500, 43.750, Opensky_wing_light , // <-----3 previously
light.10= 5, 17.7, -29.200, -2.000, Opensky_nacelle_refl ,
light.11= 5, 17.7, 29.200, -2.000, Opensky_nacelle_refl ,
light.12= 5, 50.9, -11.700, 0.000, Opensky_nacelle_refl ,
light.13= 5, 50.9, 11.700, 0.000, Opensky_nacelle_refl ,
light.14= 5, 56.9, -13.700, 1.900, Opensky_nacelle_refl ,
light.15= 5, 56.9, 13.700, 1.900, Opensky_nacelle_refl ,
light.16= 5, 83.067, 0.000, -2.000, Opensky_nacelle_refl ,
light.17= 3, 79.1, -6.500, 6.000, Opensky_nacelle_refl ,
light.18= 3, 44.79, -4.500, 6.000, Opensky_nacelle_refl ,
light.19= 3, -47.11, 0.000, -3.000, Opensky_wing_light ,

In der Aircraft.cfg dann noch die Einträge unter
title=
atc_airline=
ui_manufacturer=Ready for Pushback
ui_type=747-200F
ui_variation=
bearbeiten, um die Maschine im Auswahlmenü unter Ready for Pushback zu finden.
Dann klappt es sogar mit dem Load - Editor.

Bei Passagiermaschinen entsprechend vorgehen.

Gruß

Steffmann