Hi Rico,
laut Anleitung sind wohl keine direkt dabei.
Kurzer Auszug der Anleitung, habe das selbst noch nicht probiert.
Schnipp>>>>>>>>>>>>
The Sea hurricane has been tested for carrier landings using the commercial "Arrcab" application and the freeware "3wire" application which requires an unregistered version of FSUIPC and Microsoft .NET installed to function. It will almost certainly work with Doug Dawsons rcbco-11.zip, although it is not tested with this app. Both freeware applications and FSUIPC are available at
www.avsim.com. Important: The "wire braking" settings on most carrier applications are set to catch an F-14 at 140 kias. Reduce wire braking settings in your carrier app to compensate for the lighter, slower aircraft.
The carrier approach is essentially the same as described above, but don't forget to drop the tailhook and activate the carrier trap application! Aim to touch down after the round-out on the second wire and apply full power about a second after touchdown to insure yourself in the event of a "bolter’. Ensure that you are practiced and good at conventional runway landings before attempting a carrier trap!
You'll benefit from the freeware arrcab carriers package by Richard Hogen, available from
www.avsim.com or
www.flightsim.com.
If you have ArrCab by Richard Hogen, use the following to set the cable catch zone in the "ArrestorCables.dat'" file:
Schnapp<<<<<<<<<<<<<
Gruß,
Wolfram