[hagedornsc]

Hi miteinander,

oben hat FO Niko auf einen Beitrag hingewiesen, wie die pss747 im fs9 fliegbar ist. Hier erst mal der Orginaltext aus dem pss forum, der dem ganzen zugrunde liegt.


PSS 747 can work in FS 2004 but you will need the FS 2000 gauge version of PSS 747. You can get it from FS 2000/2002 world airliners cd from justflight, or from your original fs 2000 product pss 747.

The following procedure is not supported by anybody, note it doesn't work for everyone, for instance myself :'( . But it worked well for several people.

- Install the PSS into FS 2004 using the FS 2000 version, DO NOT INSTALL FS 2002 PATCH NOW.

- Go to your FS9/Gauges directory, and copy in a safe place the PSS-747.gau.

- NOW install the PSS 747 FS 2002 patch. (airfile, and aircraft.cfg from FS 2002 are better for use in FS9)

- Ok, you can copy the previoulsy saved PSS-747.gau (FS 2000 version) into your FS9 / gauges directory. This is very important PSS-747.gau from FS 2002 is not said to be FS9 compatible.

- Now it's time to edit panel.cfg . (BACKUP THEM BEFORE)
Open the file with windows notepad.
Look for it into the following directory
FS9\Aircraft\PSS-747\panel.XX (XX can be the one of your choice : GE / PW / RR , i advice you to edit everyone ).

- Into panel.cfg , section, you should read at the end :

VIEW_DOWN_WINDOWS=37
VIEW_DOWN_DIR=15.0, 0.0, 0.0

If you have those in that place :
VIEW_UP_WINDOWS=37
VIEW_UP_DIR=-15.0, 0.0, 0.0
Replace them with the first lines above, that's not right it's FS 2000 version panel.cfg)

- We are still editing panel.cfg :
Each time you see PSS-744!ButtonHide, write // at the beginning of this line. This will disable each gauge not FS 9 100% compatible, it may crash while panning the view around, or when you call for overhead panel.
Example : gauge00=PSS-744!ButtonHide, 1, 1, 1
becomes : //gauge00=PSS-744!ButtonHide, 1, 1, 1

You should have 8 lines to edit in this way.

- Save and Exit

- Edit the two others panel.cfg if you want..

- Load FS 2004 / Aircraft / Boeing / PSS 747-400

- It will ask you to disable (or not) completely the functionalities of the aircraft because it's not FS 9 compatible


Jetzt habe ich erst einmal alles soweit umgebaut, aber habe u.a. folgendes problem:
Meiner 747 fehlen leider die Fahrwerke , startet und fliegt aber trotzdem auf den ersten Blick "ganz ordentlich". Kann das nicht vorhandene Fahrwerk auch einfahren.

Wenn ich eine Route laden will, in dem FMC stürzt der Flusi allerdings total ab. Da die PSS747 nicht für den fs 9 ist, aber ich auch nicht auf das Wetter des fs9 verzichten will, hat einer vielleicht eine Idee, bei dem es einigermassen mit der pss747 funktioniert ?

Gruss

Sven