Einzelnen Beitrag anzeigen
Alt 26.03.2004, 21:42   #13
MarkusH
Newbie
 
Registriert seit: 17.03.2004
Beiträge: 2


Standard

Zitat:
Original geschrieben von ff
Kontrolliere zur Sicherheit ob der MAC als Subnetmask 255.255.255.0 eingetragen hat.
hat er. was bedeutet das jetzt für mich bzw. wie gehe ich vor?

danke in jedem fall fürs aufmerksam machen. ich denk aber, daran liegts nicht, oder findet ihr hier einen hund:

Routing tables

Internet:
Destination Gateway Flags Refs Use Netif Expire
default 212.186.42.1 UGSc 19 204 en1
127 127.0.0.1 UCS 0 0 lo0
127.0.0.1 127.0.0.1 UH 7 82266 lo0
169.254 link#5 UCS 0 0 en1
212.186.42 link#5 UCS 1 0 en1
212.186.42.1 0:5:9a:5b:23:fc UHLW 19 0 en1 1112
212.186.42.132 127.0.0.1 UHS 0 14 lo0

Internet6:
Destination Gateway Flags Netif Expire
::1 ::1 UH lo0
fe80::/64 fe80::1 Uc lo0
fe80::1 link#1 UHL lo0
fe80::/64 link#5 UC en1
fe80::20a:95ff:fef8:8a9c 0:a:95:f8:8a:9c UHL lo0
ff01::/32 ::1 U lo0
ff02::/32 ::1 UC lo0

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULT ICAST> mtu 1500
ether 00:0a:95:c8:81:2c
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULT ICAST> mtu 1500
inet 212.186.42.132 netmask 0xffffff00 broadcast 212.186.42.255
inet6 fe80::20a:95ff:fef8:8a9c prefixlen 64 scopeid 0x5
ether 00:0a:95:f8:8a:9c
media: autoselect status: active
supported media: autoselect
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:0a:95:ff:fe:c8:81:2c
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>


traceroute to 193.171.250.178 (193.171.250.178), 30 hops max, 40 byte packets
1 10.34.4.113 (10.34.4.113) 10.635 ms 24.753 ms 7.336 ms
2 212.17.99.45 (212.17.99.45) 7.193 ms 6.572 ms 2.358 ms
3 at-vie-p-r11a-pos-2-0.upc.at (213.47.218.81) 9.029 ms 2.62 ms 4.718 ms
4 * * *
5 * * *
6 * * *
7 tk212017115058.teleweb.at (212.17.115.58) 4.547 ms 5.455 ms 6.215 ms
____________________________________
In a world without walls and fences, who
needs Windows and Gates?
MarkusH ist offline   Mit Zitat antworten