WCM Forum

WCM Forum (http://www.wcm.at/forum/index.php)
-   Software (http://www.wcm.at/forum/forumdisplay.php?f=5)
-   -   Was ist ein "infinite loop bug" unter XP" (http://www.wcm.at/forum/showthread.php?t=68184)

mankra 29.08.2002 22:54

Was ist ein "infinite loop bug" unter XP"
 
So, da ich nun schon ewig herumsuche, warum mein Sys so unstabil ist, könnte es sein, das es sich um den infinite loop Bug handelt.
Leider hat die Google Suche auch nicht viel gebracht.
Wer kann mir dazu mehr sagen?

Woher kommt das und noch wichtiger wie behebt man das.

Zur Erklärung: Bei XP stürzen 3D Games innerhalb weniger Minuten ab, Bei 3dmark im Endlosmodus kam ein Bluescrenn mit der Meldung:

Der Grafikartentreiber schein in einer Endlosschleife zu hängen. Damit keine Hardware beschädigt wird, wird das Sys heruntergefahren ...........

Unter Win 98 läufts prima.

Bastet 30.08.2002 19:26

VIA
Diesmal nur ein Update der Internet-Seiten: VIA nimmt Stellung zum "Infinite-Loop"-Fehler. Dieser taucht vor allem mit Nvidia-Grafikkarten mit GeForce-2 oder -3-Chip unter Windows 2000 und XP auf und führt zu Abstürzen, Bluescreen oder Reboot-Vorgängen. VIAs Bug-Spezialist John Gatt führt die Abstürze nicht auf VIA-Chipsätze zurück, weil sie auch auf Mainboards mit Chipsätzen von Intel oder SiS aufträten. Schlechte oder mit zu schnellem Timing betriebene Speichermodule würden das Problem aber verstärken. Als Abhilfe empfiehlt er Maßnahmen wie das Installieren der aktuellen VIA-Treiber (4.37v(a)) und vor allem das Herunterschrauben der Speicher-Timings im BIOS-Setup. Seine Untersuchungen zur "DRAM Command Rate" (beim VIA KT266A) decken sich mit den Ergebnissen im c't-Labor (siehe den großen Vergleichstest von KT266A-Boards in der c't 1/2002, ab 31.12.01 am Kiosk): 1T funktioniert nur mit einem einzelnen, guten Modul. Bei schlechteren Modulen oder beim gleichzeitigen Betrieb von zwei oder mehr Modulen treten Fehler auf.

quelle

Bastet 30.08.2002 19:29

btw:

Introduction

There has been a technical issue which has been discussed at length in the VIA Arena forums and in many other forums for a few months now, often known as the Infinite Loop or NV Loop/BSOD error.

What is the loop error?

The loop error is how Windows XP describs a critical error related to the graphics card. The loop error can and has been been reproduced with any video card and any chipset. It is by no means a new problem. Windows XP has just given it a name. If you were to plug in a faulty video card and plugged it in to any motherboard using WinXP, it will reproduce the loop error. That doesn't mean that the loop error is always caused by a faulty video card though.

What causes the loop error?

There is not one single factor or issue which causes the loop error. As mentioned, this issue has been discussed at length in the VIA Arena forums and the biggest problem has been that almost everyone, myself included have been desperatly looking for one single cause and fix. The loop error is a critical halt error that prevents you from using your mouse, keyboard or anything else on your PC apart from the reset button - just like a typical blue screen of death or hard lock up in Win98/ME. When your system locks up, it cannot process information from either the CPU or video card or both. If the CPU is locked up, the video card will continue to send information across the bus. The information is then bounced back to the video card because the processor has stopped responding. OR, if the video card has locked up, the processor will try to return the video information and it will bounce back. The information gets stuck in a loop bouncing back and forth between the CPU and video card. This can be caused by either the video card or CPU locking up, when either one cannot process the display data. And presto - we have the infinite loop. The lock up may be shown on a system in a variety of ways such as:

WinXP: 3D or 2D applications - system will lock and and then automatically restart. This is a feature of XP and not part of the issue. The automatic restart simply saves you from having to press the restart button.

Win2K: 3D or 2D applications - system will lock up and then present a blue screen error reporting an infinite loop

WinME/98: 3D or 2D applications - system will lock up, requiring you to reset the system with either the reset button or power button. Ctrl-Alt-Del will not work.

The "loop error" is in essence just a name that Microsoft has given to this type of error which can not be recovered from by using Ctrl-Alt-Del. Windows cannot give more detail in the error message because of course, when this type of error occurs and the PC is locked, there is no way for the OS to receive and process more information from the system on what may be going wrong. There is not one single cause and the issue must be looked at on a system by system basis.

mankra 02.09.2002 21:31

Der Speicher war der Schuldige, siehe auch http://www.wcm.at/vb2/showthread.php?s=&postid=592623

mr.red 25.10.2004 11:07

weil ich auch welche hab, kleines update
http://www.short-media.com/forum/arc...hp/t-5580.html
bei mir kommen sie manchmal beim benutzerwechsel


Alle Zeitangaben in WEZ +2. Es ist jetzt 20:57 Uhr.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2009 FSL Verlag