abit kt7 raid
 

hi an alle abit user
könnt ihr mir die schnellsten speicher einstellungen posten?
weiss nicht genau ob ich es richtig eingestellt habe
danke

Bank 0/1 Dram Timing TURBO
Bank 0/2 Dram Timing TURBO
.
.

DRAM Bank Interleaving 4-Way

SDRAM Cycle Length 2

The optimum settings for your RAM are as follows:

DRAM Clock Host CLK (for PC100 RAM with an FSB of 100MHz, or PC133 RAM with an FSB of 133MHz on the KT7A/KT7A-RAID)
HCLK+PCICLK (for PC133 RAM with an FSB of 100MHz)

Enhance Chip Performance Enabled

Force 4-way interleave Enabled

Enable DRAM 4k-Page Mode Enabled

Auto Detect DIMM/PCI Clk Enabled (this is an EMC setting and does not affect performance)

Bank x/y DRAM Timing - set as fast as you can SDRAM 8/10ns and Medium are the slowest
Normal and Fast, or Turbo is the fastest (you'll have to benchmark using Sandra: on some machines Fast is faster than Turbo!)

DRAM Bank Interleave Optimum is 4-Way
If not supported, try 2-Way, else Disable

Delay DRAM Read Latch Auto
With large amounts of RAM, you may need to increase this delay value for stability

MD Driving Strength HI is recommended for stability with most SDRAM types
If HI is unstable, try LO
This setting has no impact on performance

SDRAM Cycle length Set to 2 for CAS 2 PC133 SDRAM
Set to 3 for PC100 SDRAM, most unbranded PC133 SDRAM and PC133 CAS 3 SDRAM

Fast R-W Turn Around Enabled for maximum performance
Disabled for stability

Memory Parity/ECC Check ECC SDRAM is not supported and hence this BIOS option is not functional

von "Paul's Unofficial ABIT KT7 FAQ"

gruss,
snowman