T.O. Config Offset ???
 

hat jemand den PM Offset für die
T.O. CONFIG Taste ????

Grüße
Stefan

Hello Stefan,

To get your ecam selectpanel to work you also need to have PMsystems.. if you have PMsystems you can also see when you go over the buttons what the offset will be for each button, or switch.. just put PMsystems into development mode or check the sysvar list in your PMsystems folder.

gr.
Frans M

Hello Franz,l

Yes i have PMSystems, there are no T.O. CONFIG Button in the ECAM PANEL .

Have you an Offset or a T.O.Config button
in Your A320 PMSYSTEMS ????

Thanks
Stefan

Außerdem suche ich den Offset für den Captain ILS Taster neben dem FD Taster,
jemand eine Idee ???

Danke im Vorraus

Stefan

Hmm, i see ok i dont use PMsystems and i notice you miss more buttons there like the STS CANC CLR...

will inform Enrico to see that and see if that also can be fixed would be handy to use when you do your take off and landings..

About your other question.. i assum you mean the LS button not the ILS because that one is not next to your FD...

the offset for that is in the dropdown list of FSbus i think there is only a small issue with that one because PM use 2 offsets for them one for ON and one for OFF... ( I use the G1 of FDS and then it works without probs.. )
gr.

Frans M

Hallo,

ich habe nun Enrico kontaktiert,
der sagte mir folgendes :

(Ich)> nun habe ich festgestellt das bei dem ECAM Panel bei PMSystems gar kein
T.O. CONFIG Button/Taster da ist wird dieser in Zukunft noch umgesetzt ???

(Enrico)Ja. Ist 4F4 value 408

kann mir jemand sagen wie ich dies
in die FSIF eintragen muß ??

Vielleicht so ??
2,"TO.CONFIG", 657, 0, 0, BIT, 0,RW, 10, 1, 408,

Gruß
Stefan

Sorry Stefan, not really understand what you all metion in the german words here...

i guess this would work better:

2,"TO.CONFIG", 657, 0x04F4, 0, BIT, 0,RW, 10, 1, 408,

gr.
Frans M

oops..:

2,"TO.CONFIG", 657, 0, 0x04F4, I8, 0,RW, 10, 1, 408,
2,"TO.CONFIG", 657, 0, 0x04F4, I16, 0,RW, 10, 1, 408,
2,"TO.CONFIG", 657, 0, 0x04F4, I32, 0,RW, 10, 1, 408,

not sure what one give it a test...

gr.

Frans M