WCM Forum

WCM Forum (http://www.wcm.at/forum/index.php)
-   Simulationen (http://www.wcm.at/forum/forumdisplay.php?f=27)
-   -   IFDG 320 mit PSS (http://www.wcm.at/forum/showthread.php?t=134802)

superspecial 20.05.2004 18:00

IFDG 320 mit PSS
 
Hallo,

komme mal wieder nicht weiter.
IFDG A 320 nach Anleitung mit PSS Panel versehen.
Nun mein Problem, im Simulator kann ich den IFDG Bus nicht finden. Er wird im Aircraftverzeichnis nicht angezeigt.Der Ordner ist vorhanden !
Hier die ersten Zeilen der Aircraft.CFG;
[fltsim.0]
title=iFDG A320-212 Condor Flugdienst GmbH
sim=A 320C
model=CFM
panel=
sound=CFM
texture=
kb_checklists=a320_check
kb_reference=a320_ref
atc_id=D-AICL
atc_airline=Condor
atc_flight_number=DE324
atc_heavy=0
ui_manufacturer=iFDG Airbus
ui_type=A320-212
ui_variation=Condor Flugdienst GmbH
description="The A320 was launched on March 2, 1984. It is the first subsonic commercial aircraft with fly-by-wire controls. First flight took place on February 22, 1987. The A320-100 was the initial version and was superseded by the A320-200 from the third quarter of 1988. The A320-200 differs from the A320-100 in having wingtip fences, a wing center-section fuel tank, and a higher MTOW. Model by Albaro Villegas and Ric Barker. Master Textures by Ben Jones. FDE by Pedro Oliveira. CFG textures by Clemens Pieper."
atc_id_color=0000000000
visual_damage=0
prop_anim_ratio=1.72

wo liegt der Fehler ?

Gruss Reinhard

Lexif 20.05.2004 18:14

Hallo!

Das klingt, als wäre ein Fehler in der aircraft.cfg. Überprüf mal folgendes:

title=iFDG A320-212 Condor Flugdienst GmbH
Der "title" muß einmalig sein. Gibt es ein weiteres Flugzeug, das den selben Eintrag an dieser Stelle hat, wird nur eins von beiden angezeigt. Ändere den doch einfach mal probehalber indem du z.B. irgendwas dazuschreibst oder wegnimmst.

sim=A 320C
Diese Sektion macht Ärger, wenn es kein file namens "A 320C.air" im Ordner des Flugzeuges gibt. Dann taucht das Flugzeug nicht auf.

model=CFM
Gibt es keinen Ordner model.CFM im Ordner des Flugzeuges oder befindet sich kein ordentliches Modell drin, kann es Probleme geben.

Viel Spaß!
Felix

Maddin 20.05.2004 18:27

fehler gefunden
wie lefix schon sagte, wenns es keine passende .air datei gibt wird der flieger net angezeigt und das haben wir hier...
sim=A 320C --> sim=A320C

zum vergleich, mein IFDG Condor A320 sieht so aus (auch mit PSS gemerged)

[fltsim.1]
title=A320-212 CFG
sim=A320C
model=
panel=
sound=
texture=cfg
kb_checklists=a320_check
kb_reference=a320_ref
atc_id=D-AICL
atc_airline=Condor
atc_flight_number=DE324
atc_heavy=0
ui_manufacturer=iFDG Airbus
ui_type="A320-212"
ui_variation=Condor Flugdienst GmbH
description="The A320 was launched on March 2, 1984. It is the first subsonic commercial aircraft with fly-by-wire controls. First flight took place on February 22, 1987. The A320-100 was the initial version and was superseded by the A320-200 from the third quarter of 1988. The A320-200 differs from the A320-100 in having wingtip fences, a wing center-section fuel tank, and a higher MTOW. Model by Albaro Villegas and Ric Barker. Master Textures by Ben Jones. FDE by Pedro Oliveira. CFG textures by Clemens Pieper."
atc_id_color=0000000000
visual_damage=0
prop_anim_ratio=1.72


Alle Zeitangaben in WEZ +2. Es ist jetzt 10:58 Uhr.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2009 FSL Verlag