WCM Forum

WCM Forum (http://www.wcm.at/forum/index.php)
-   Simulationen (http://www.wcm.at/forum/forumdisplay.php?f=27)
-   -   Schwarzer Bildschirm bei Wechsel Fullscreen/Windowed (http://www.wcm.at/forum/showthread.php?t=107938)

MeatWater 06.09.2003 01:17

Schwarzer Bildschirm bei Wechsel Fullscreen/Windowed
 
Ich kpoier das mal einfach hier rein, stammt von Peter Dowson:

"FS2004 and Black Window problems when switching to Full Screen

After some changes in my hardware, I have been able to reproduce this black screen problem reliably, and I've managed to narrow it down.

First, I should say that the problem I can reproduce may not be the one some are reporting. In my case, FS2004 isn't actually hung. It presents a black screen instead of scenery or whatever, but pressing ALT brings up the Menu, and using that to change something in the Display settings actually recovers the situation completely.

Anyway, the problem I can reproduce is related to the FS window subclassing order. Something is screwing up the subclass chain. This affects these modules (of those I've tested):

FSUIPC.DLL
AdvDisplay.DLL
PFC.DLL
ViMaCore2004.DLL

It seems that, here at least, I can eliminate the problem by ensuring that the window subclassing in my DLLs is performed as early as possible. This can already be done in FSUIPC simply by adding the parameter:

InitDelay=0

to the [General] section of the FSUIPC.INI file. Please, those of you with black screen problems on mode switching, try this and let me know if it works for you too. If it does seem like the correct solution, I will default this parameter in the next version of FSUIPC (but only when it is run in FS2004).

Unfortunately the same easy change does not apply to AdvDisplay nor PFC. I will release revised versions as soon as I hear that the change in the FSUIPC parameter works. So, to test, remove these DLLs if you use them. I will also write to Lago about the similar problem with ViMaCore2004.DLL.
There may well be other add-in DLLs which suffer in the same way, so if you do still get problems, please check what you have installed in addition to FSUIPC. Thanks.

Please note that if this work-around does deal with the actual reported problems, then it points to some bug in FS itself, as the work-around only changes the order in which the various parts of FS subclass the main window.
The techniques for this have been use identically in many modules since FS95 days without such problems before."

==========================

Pantu 06.09.2003 09:47

Hallo Nick,

danke für diesen Tip.

Nun, dies ist zwar off topic, aber ich will´s dennoch versuchen, da Dein Homepagelink nicht funktioniert (error 404 - url syntaktisch inkorrekt).
Habe vor einiger Zeit, glaube es war im Mai, ein 767 video von Dir runtergeladen und nach einem HD crash ist es nun leider weg und auch im Netz nicht mehr zu finden. Hast Du eventuel noch eine Kopie oder kannst mir einen Tip geben wo ich es finden und downloaden kann?
Es war mit guter Musik unterlegt. Wie heisst übrigens dieser Musiktitel?.

Vielen Dank im Voraus

Gruß

Peter

MeatWater 06.09.2003 10:47

Das Video kannst Du hier runterladen:

http://www.westerntrainer.de/767-300er_pic_wmv.zip

5MB

Zur Musik: es handelt sich dabei um spezielle "royalty free" Filmusik aus der SmartSound Reihe. Diese Musik kann man allerdings nur in Verbindung mit Adobe Premiere oder Pinnacle Studio/Edition einbauen und modifizieren, für den "normalen" User ist das nichts.

Jakob O. 06.09.2003 11:14

Hallo MeatWater,

ich würde mir auch gerne das Video ansehen, aber unter der oben angegebenen Link kommt folgende Fehlermeldung: error 404: Datei nicht gefunden!

Schade!

Ich werde später noch einmal probieren.

MfG
Jakob

MeatWater 06.09.2003 11:18

Sorry, mein Fehler: Korrektur>

http://www.westerntrainer.de/fs/767-300er_pic_wmv.zip

Jakob O. 06.09.2003 12:00

Danke, jetzt hat es funktioniert.

Noch etwas, der Link, der von dieser Seite auf dein Homepage führen soll, funktioniert auch nicht.

MfG
Jakob

MeatWater 06.09.2003 13:01

Zitat:

Original geschrieben von Jakob O.
Danke, jetzt hat es funktioniert.

Noch etwas, der Link, der von dieser Seite auf dein Homepage führen soll, funktioniert auch nicht.

MfG
Jakob

Wenn du die meatwater.com meinst, weiss ich. Relaunch am 01.10.

Die www.vpncentral.ch.vu geht aber.

Jakob O. 06.09.2003 15:19

Hallo MeatWater,

genau, ich meinte dein Link meatwater.com. Aber jetzt ist es klar.

OT.
Aber ich habe da eine Frage.
Wie erstellt man in diesem Forum Quoten?

Ich meine so etwas wie Du im vorigen Schreiben gemacht hast.

Danke
Grüße
Jakob

MeatWater 06.09.2003 15:36

Zitat:

Original geschrieben von Jakob O.
Wie erstellt man in diesem Forum Quoten?
Die Antwort hast Du Dir ja schon fast selber gegeben ;)

Unter dem Posting dass Du zitieren möchtest einfach auf "quote" klicken.

Jakob O. 06.09.2003 16:11

Zitat:

Original geschrieben von MeatWater


Die Antwort hast Du Dir ja schon fast selber gegeben ;)

Unter dem Posting dass Du zitieren möchtest einfach auf "quote" klicken.

Hey, MeatWater,
herzlichen Dank. Ich muß ja Blind sein. Ich lese schon solange hier im Forum und das ist mit noch nicht aufgefallen :verwirrt:

Danke
Jakob


Alle Zeitangaben in WEZ +2. Es ist jetzt 08:43 Uhr.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2009 FSL Verlag