WCM Forum

WCM Forum (http://www.wcm.at/forum/index.php)
-   Simulationen (http://www.wcm.at/forum/forumdisplay.php?f=27)
-   -   Problem im Vollbildschirmmodus (http://www.wcm.at/forum/showthread.php?t=108007)

Peterfly 06.09.2003 21:46

Problem im Vollbildschirmmodus
 
Hallo,

ich hab' wieder mal ein Problem mit dem FS 2004!
Wenn ich über ALT+ENTER die Vollbildschirmdarstellung verlasse, dann den Flusi auf die Leiste "minimiere" um auf's Desktop zugeifen zu können (wegen Beenden der Internetverbindung nach dem laden des Wetters oder Starten von "Supercombo"), komme ich nicht mehr zurück in den Vollbildmodus, der Schirm wird schwarz, und nach einer Weile kommt dann die Fehlermeldung "...muß wegen eines schwerwiegenden Fehlers beendet werden!"
Kennt jemand das Problem und kann mir helfen?

Grüße

Peter

MeatWater 06.09.2003 23:34

Das Problem ist bekannt und wird durch die Deinstallation des XP Hotfix Q328310 behoben

Peterfly 07.09.2003 10:09

Hallo Meat Water,
hab' den Q328310 bei Microsoft gefunden und installiert.
Hat aber leider nichts gebracht. Wenn ich wieder zurück in den Vollbildschirmmodus will, wird's ganz schwarz!

Horst LOWW 07.09.2003 10:36

Deinstallieren nicht Installieren!
Horst

Peterfly 07.09.2003 11:07

Ups!
Da hab' ich wohl was falsch verstanden!
Danke für Eure Tips!

Peter:rolleyes:

Seb 07.09.2003 11:48

Hab das gleich Problem.

Wo finde ich den Hotfix und wie deinstalliere ich ihn?

Grüße
Sebastian

Peterfly 07.09.2003 15:27

Du findest ihn unter Systemsteuerung/Software. Dort sind alle XP-Updates aufgelistet. Von dort kannst Du sie auch gleich löschen!

Gruß

Peter

Peterfly 07.09.2003 22:20

Tja, aber ich habe das Problem immer noch! Schwarzer Bildschirm nach Umschalten in den Vollbildschirmmodus.
Hat noch jemand eine Idee, wie man das beheben könnte?

Peter

provider 08.09.2003 00:01

Das muss noch an etwas anderem liegen.
Hotfix habe ich auch deinstalliert und das Prob besteht auch noch !

Gruß
Jochen

j.eberhardt 08.09.2003 00:32

Ich hatte das gleiche Problem! Schau bitter unter Ordner "Schwarzer Bildschirm bei Wechsel Fullscreen/Windowed". Der Eintrag in der FSUIPC.INI (InitDelay=0) brachte bei mir den Erfolg.

Jörg E. aus Berlin

Seb 08.09.2003 08:16

Sorry, kann den Ordner nicht finden. Was genau muss man tun?

Gruß
Sebastian

Peterfly 08.09.2003 09:11

Ja, das möchte ich auch gerne wissen....

Peter

j.eberhardt 08.09.2003 09:45

Sorry, ich meinte den Thread "Schwarzer Bildschirm bei Wechsel Fullscreen/Windowed":

"FS2004 and Black Window problems when switching to Full Screen

After some changes in my hardware, I have been able to reproduce this black screen problem reliably, and I've managed to narrow it down.

First, I should say that the problem I can reproduce may not be the one some are reporting. In my case, FS2004 isn't actually hung. It presents a black screen instead of scenery or whatever, but pressing ALT brings up the Menu, and using that to change something in the Display settings actually recovers the situation completely.

Anyway, the problem I can reproduce is related to the FS window subclassing order. Something is screwing up the subclass chain. This affects these modules (of those I've tested):

FSUIPC.DLL
AdvDisplay.DLL
PFC.DLL
ViMaCore2004.DLL

It seems that, here at least, I can eliminate the problem by ensuring that the window subclassing in my DLLs is performed as early as possible. This can already be done in FSUIPC simply by adding the parameter:

InitDelay=0

to the [General] section of the FSUIPC.INI file. Please, those of you with black screen problems on mode switching, try this and let me know if it works for you too. If it does seem like the correct solution, I will default this parameter in the next version of FSUIPC (but only when it is run in FS2004).

Unfortunately the same easy change does not apply to AdvDisplay nor PFC. I will release revised versions as soon as I hear that the change in the FSUIPC parameter works. So, to test, remove these DLLs if you use them. I will also write to Lago about the similar problem with ViMaCore2004.DLL.
There may well be other add-in DLLs which suffer in the same way, so if you do still get problems, please check what you have installed in addition to FSUIPC. Thanks.

Please note that if this work-around does deal with the actual reported problems, then it points to some bug in FS itself, as the work-around only changes the order in which the various parts of FS subclass the main window.
The techniques for this have been use identically in many modules since FS95 days without such problems before."

Tschüß

Jörg E. aus Berlin

Peterfly 09.09.2003 11:21

Problem gelöst, Danke

Peter

Seb 09.09.2003 14:51

Danke auch von mir!
Funktioniert jetzt!

Grüße
Sebastian

j.eberhardt 09.09.2003 18:07

Na also! Viel Spaß weiterhin!

Jörg E. aus Berlin


Alle Zeitangaben in WEZ +2. Es ist jetzt 11:34 Uhr.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2009 FSL Verlag