Hallo Chris,

Wäre nett von dir,wenn du es hier posten würdest
habe normaleweise keine Probleme damit,aber
ich kann nur diese AFCAD-Texturen richtig
darstellen.

Gruß Peter

Danke für die Readme Datei.
Bei mir ist sie im Original nicht vorhanden.
Habe sie jedenfalls nicht gefunden :D

Hallo zusammen,

Ich weiß nicht aber habt ihr euch auch den
Effect Pack gesaugt,wenn nicht hier ist
das zip.

Gruß Peter

Ok, zur Sicherheit hier nochmal das readme: (Ist im ersten Paket versteckt)


Flight Ontario
Thunder Bay Scenery
Released Nov 2, 2002

Thunder Bay, ON, Canada
CYQT
This is a VFR scenery for the light aircraft enthusiast

Installation
Many feel that they do not need to read instructions. If you have no intentions of reading this readme, you will have little hope of correctly installing this scenery as this is a scenery that has very specific installation instructions.
We will not be replying to emails when the answer can be found within this readme.

1. Create a folder called “THBAY” anywhere, on any HD, on your system. Most place it in the FS2002\ADDON SCENERY folder
2. Inside that folder create a folder called “Scenery” and one called “Texture” NOT Textures, a common mistake.
3. Unzip TBPAK1.zip to the THBAY\Scenery folder
4. Unzip TBPAK2.zip and TBPAK3.zip to the THBAY\Texture folder
5. Start FS2002 and go to the library and click ADD NEW AREA. The scenery name you give it must be “TB”, not Thunder Bay, nor THBAY or any other name for that matter. We can’t stress it enough, the name must be “TB” and only ”TB”
6. .Close down FS2002. Open the scenery.cfg file found in your FS2002 root directory into Notepad. Scroll down to an area that looks something like the following:

[Area.xxx]
Title=TB
Layer=xxx
Active=TRUE
Local= ADDON SCENERY\THBAY
Remote=
Required=FALSE

Insert the following flatten lines by doing a copy and paste from the following example

[Area.xxx]
Title=TB
Layer=xxx
Active=TRUE
Local=ADDON SCENERY\THBAY
Flatten.0=965,N48 25.093,W89 38.433,N48 25.093,W89 37.334,N48 24.586,W89 37.334,N48 24.586,W89 38.43319
Flatten.1=702,N48 21.99,W89 07.47,N48 21.99,W89 07.32,N48 21.93,W89 07.32,N48 21.93,W89 07.47
Flatten.3=634,N48 27.3284,W89 11.3323,N48 27.3284,W89 11.0795,N48 27.2711,W89 11.0795,N48 27.2711,W89 11.3323
Flatten.3=885,N48 23.625,W89 37.1878,N48 23.625,W89 36.8577,N48 23.5355,W89 36.8577,N48 23.5355,W89 37.1878
Flatten.4=702,N48 21.9836,W89 35.0401,N48 21.9836,W89 34.8985,N48 21.8404,W89 34.8985,N48 21.8404,W89 35.0401
Flatten.5=702,N48 20.8592,W89 25.6675,N48 20.8592,W89 25.1384,N48 20.7696,W89 25.1384,N48 20.7696,W89 25.6675
Flatten.6=596,N48 26.7794,W89 11.6411,N48 26.7794,W89 11.5325,N48 26.7456,W89 11.5325,N48 26.7456,W89 11.6411
Flatten.7=589,N48 21.7452,W89 07.4933,N48 21.7452,W89 07.4258,N48 21.7119,W89 07.4258,N48 21.7119,W89 07.4933
Flatten.8=965,N48 25.4772,W89 36.2821,N48 25.4772,W89 35.5986,N48 25.4146,W89 35.5986,N48 25.4146,W89 36.2821
Flatten.9=653,N48 23.09,W89 20.5,N48 23.09,W89 18.53,N48 21.66,W89 18.53,N48 21.66,W89 20.5
Remote=
Required=FALSE

Then Save.

You are now finished the installation

Set up at CYQT – Thunder Bay, or CKG8 – Kakabeka Falls

***Noteworthy***
This is a Summer ONLY, day and night scenery. If you choose any other season other than summer you will see nothing but grey ground tile textures.
We will also suggest that you set the zoom level to 1.26 for any light aircraft as this setting is much more realistic than the default FS setting.
May we also suggest that you turn collisions off or you will be colliding with invisible models.
And finally, please copy runway12c.bmp from the THBAY\Texture folder to your FS2002\texture folder.

Enjoy!

Contacts
FlightOntario@rogers.com

Web page
http://flightontario.cjb.net

Hallo Chris,

Danke fürs Texture-file,werde es mir mal
durchschauen,der Flattenbefehl hat mir gefehlt.

Nochmals vielen Dank
Gruß Peter