WCM Forum

WCM Forum (http://www.wcm.at/forum/index.php)
-   Netzwerke (http://www.wcm.at/forum/forumdisplay.php?f=32)
-   -   Webcam + USR8000 + WinXP Prof. (http://www.wcm.at/forum/showthread.php?t=53196)

darkside 21.04.2002 22:02

ich glaub schon fast dass meine cam da ned mitspielt

mike 23.04.2002 07:25

Also an der Kamera dürfte es definitv nicht liegen. Hab's nun ausprobiert (und zwar mit mehreren Kameras ;) ) Es funkt nicht. Hatte noch nicht die Zeit, mirs genauer anzusehen, werde aber Bescheid geben, sobald ich eine Lösung, oder eben keine hab, was ich nicht hoffe.

_m3 23.04.2002 08:20

TCP Port 1863 freigeschalten?

mike 23.04.2002 18:48

Port ist freigeschalten. Bist du sicher das es 1863 ist? Weil es geht natürlich dennoch nicht.

g17 23.04.2002 19:32

Nicht nur

http://www.practicallynetworked.com/..._port_list.htm

sagt
__________________________________________________ __________
MSN Messenger
(Watch Out! Opens a wide port range!)
NOTE: Shut off any personal firewall programs such as BlackIce, ZoneAlarm, etc.
Ports 6891-6900 enable File send,
Port 6901 is for voice communications
Allows Voice, PC to Phone, Messages, and Full File transfer capabilities.
Thnx to Brad King & Bill Finch Jr.
IN TCP 6891 - 6900
IN TCP 1863
IN UDP 1863
IN UDP 5190
IN UDP 6901
IN TCP 6901
__________________________________________________ __________

g17

_m3 24.04.2002 08:24

http://www.usr.com/support/s-network.../configure.htm / Special AP:
Zitat:

Some applications require open service ports, such as Internet games, video conferencing, Internet telephony, and others. When a request is made to the ISP's given address for a specific port, it is forwarded to the machine that is hosting that particular service. These applications cannot work with a pure NAT broadband router since all the ports are blocked by default. This is a result of the broadband router's firewall function. Special Applications will allow some of these applications to work with a NAT broadband router. If the Special Applications still do not allow an application to function correctly, refer to the DMZ host option in the Miscellaneous Items.

1. Trigger: This is the outbound port number that the application assigned first.

2. Incoming Ports: When the trigger packet is detected, the inbound packets to the specified port number are allowed to pass through the firewall.

This product provides some predefined settings in the grey pad on the bottom of the Web Page Interface. Select Popular applications and click Copy to copy a predefined setting.

Note: Only one PC can be assigned a specific port number at one time.
http://messenger.msn.com/support/firewall.asp#s2z
Zitat:

To enable the use of MSN Messenger Service: Open outgoing TCP Port 1863, and configure it so that sockets on this port are open for extended periods of time.
=> Trigger ist der Port 1863, die Incoming Ports kannst Du der oben angeführten Liste entnehmen.

mike 24.04.2002 09:51

_m3 hat vollkommen recht, nur mach dir nicht allzugroße Hoffnungen, dass es dann reibungslos funktioniert. Ich habe es gestern einige male geschafft eine Verbindung herzustellen, nur unterlag das scheinbar allein dem Zufallsprinzip. Einmal hats geklappt, dann wieder überhaupt nicht usw. Zudem werde ich nun gelegentlich einfach getrennt. Das "witzige" dabei ist, dass ich laut MSM online bin, es aber gar nicht bin. Er merkt selbst nicht, das er vom Netz getrennt ist. Erst wenn ich ein Posting mache, erhalte ich die Meldung, dass diese nicht gesendet werden kann, da ich ja nicht online bin :mad:

Mal sehen, vieleicht finde ich doch noch eine Lösung, die auch wirklich funkt oder du hast mehr Glück als ich *Daumen drück*

Montafon 24.04.2002 12:53

hmm?

auch wenn es dir nicht helfen sollte

also ich hab einen Netgear RT 311 und dazwischen ein 24 Port Switch und Standleitung in meine Wohnung - bei mir funktioniert eine Creative WebCam3 problemlos und ohne was einzustellen unter allen Win Versionen

habe allerdings alle Firewalls deaktiviert am PC

darkside 26.04.2002 23:22

ich weiss leider immer noch ned weiter, werd amal a andere cam ausprobieren.

Trotzdem vielen Dank für die Bemühungen! :confused:

darkside 14.06.2002 00:04

HI

Ist zwar schon einige Zeit weit letztem Posting vergangen, aber was solls - hab die Cam jetzt ausgetauscht gegen eine Philips - geht natürlich immer noch nicht *ggg* - nur der Vollständigkeithalber.

:heul:


Alle Zeitangaben in WEZ +2. Es ist jetzt 20:00 Uhr.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2009 FSL Verlag